Hi, I followed the same steps as for building for emulator. The steps I used was from,
http://www.mail-archive.com/android-ker...@googlegroups. com/msg00596.html Use msm as config instead of goldfish as specified there. Also you may want to set the path before compiling: ->export ARCH=arm ->export CROSS COMPILE=arm-eabi- ->export PATH=$PATH:<>/mydroid/prebuilt/linux-x86/toolchain/ armeabi-4.3.1/bin Regards On Mar 16, 1:56 am, Ricardo Silva <ban...@gmail.com> wrote: > I found the problem, is because of the kernel. Something is wrong. Can > you say the steps you followed to compile to the ADP1? > > Regards > > On Mar 12, 10:52 am, Ricardo Silva <ban...@gmail.com> wrote: > > > > > The same thing here I made. First for emulator, everything ok. Then on the > > ADP1 dont work. After I download the kernel and ramdisk.img to the ADP1, it > > reboot and start again with the original system... > > > Regards, > > Ricardo Silva > > > On Fri, Mar 12, 2010 at 1:35 AM, perumal316 <perumal...@gmail.com> wrote: > > > Oh Okay, > > > > Because I also tried using "fastboot boot zImage ramdisk.img" but > > > somehow didn't work. I not sure why.So I compiled for emulator and > > > tested the new kernel in the emulator first. Then I compiled for ADP > > > and flashed the new kernel to the boot partition. > > > > Regards, > > > Perumal > > > > On Mar 11, 10:07 pm, Ricardo Silva <ban...@gmail.com> wrote: > > > > But that command will flash the boot partition and I dont want. I want > > > > to > > > > first test the kernel and then flash it > > > > > Thanks, > > > > Ricardo Silva > > > > > On Thu, Mar 11, 2010 at 2:05 PM, perumal316 <perumal...@gmail.com> > > > wrote: > > > > > You may try this command: > > > > > > flashboot flash:raw boot <zImage directory> <ramdisk.img directory> > > > > > > Regards, > > > > > Perumal > > > > > > On Mar 11, 9:31 pm, Ricardo Silva <ban...@gmail.com> wrote: > > > > > > Dear All, > > > > > > > I compiled the Android image and the kernel from the repo (MSM > > > > > > kernel). But when I use the "fastboot boot zImage ramdisk.img" on G1 > > > > > > (in FastBoot mode, with the skateboard androids), the commands runs > > > > > > ok: > > > > > > > fastboot boot ../../../../kernel/arch/arm/boot/zImage ramdisk.img > > > > > > creating boot image... > > > > > > creating boot image - 1900544 bytes > > > > > > < waiting for device > > > > > > > downloading 'boot.img'... OKAY > > > > > > booting... OKAY > > > > > > > the ADP1 restarts but with the kernel and image installed, and not > > > > > > with the one that I downloaded to the ADP1. > > > > > > > Any help please? The version of the Android is 2.0.1. Could be > > > because > > > > > > of the version of Android? > > > >http://sites.google.com/site/androidhackeryetc/kernel-building-for-an... > > > > > > > Thanks, > > > > > > Ricardo Silva > > > > > > On Mar 10, 4:05 pm, Ricardo Silva <ban...@gmail.com> wrote: > > > > > > > > Dear All, > > > > > > > > How I compile the kernel and then build Android (including the > > > kernel > > > > > > > compiled before) to the ADP1? > > > > > > > > Other question, after build, how I use the fastboot boot command? > > > the > > > > > > > ramdisk.img is need? How I do this? > > > > > > > > Sorry if this is a repeated thread, but I searched a lot of places > > > > > > > (android google groups, xda-developers) and find result with > > > different > > > > > > > approaches that I don't understand. > > > > > > > > I have the source code for dream, which i got from the htc > > > developer > > > > > > > site, but is giving me an error with giop.h (arch/arm/include/asm/ > > > > > > > gpio.h:5: fatal error: mach/gpio.h: No such file or directory). I > > > > > > > don't have experience with kernel development. > > > > > > > > Thanks, > > > > > > > Ricardo Silva > > > > > > -- > > > > > unsubscribe: > > > > > android-kernel+unsubscr...@googlegroups.com<android-kernel%2bunsubscr...@googlegroups.com> > > > <android-kernel%2bunsubscr...@googlegroups.com<android-kernel%252bunsubscri�...@googlegroups.com> > > > > > > website:http://groups.google.com/group/android-kernel > > > > -- > > > unsubscribe: > > > android-kernel+unsubscr...@googlegroups.com<android-kernel%2bunsubscr...@googlegroups.com> > > > website:http://groups.google.com/group/android-kernel- Hide quoted text - > > - Show quoted text - -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel
