Hi!
init: cannot open '/initlogo.rle'
Kernel panic - not syncing: Attempted to kill init!
This means that kernel has booted up and the first userspace process (init) has
been called. But for whatever reasons init process couldn't handle required
resource (/initlogo.rle), so signal for termination was sent to init process.
Kernel don't know what to do without any process, so it falls into panic.
I suggest checking your rootfs. May be you need another one...
Best wishes,
Vladimir Murzin
-----Original Message-----
From: Ki Seok Park <katsu.bo...@gmail.com>
Sender: android-kernel@googlegroups.com
Date: Mon, 2 Apr 2012 23:03:40
To: Android Linux Kernel Development<android-kernel@googlegroups.com>
Reply-To: android-kernel@googlegroups.com
Cc: <katsu_...@naver.com>
Subject: [android-kernel] [Kernel PANIC] ANDROID NFS Booting.
host : ubuntu 10.04 x64
android : google.gingerbread 2.3.3_r1
kernel : android.kernel 2.6.35.7
Hi.
I have a some board, using samsung s5pv210.
when Android is booting(on NAND), servicemanager is die.
------------------------------------------------------------------------------------
request_suspend_state:wakeup (0->0) at 20730120503 (2011-01-01
12:00:20.112335668 UTC)
init: untracked pid 79 exited
init: untracked pid 87 exited
init: untracked pid 94 exited
init: untracked pid 95 exited
request_suspend_state: wakeup (0->0) at 25385392045
(2011-01-0112:00:24.767607335 UTC)
init: untracked pid 89 exited
init: untracked pid 98 exited
init: critical process 'servicemanager' exited 4 times in 4
minutes;rebooting into recovery mode
Restarting system with command 'recovery'.
------------------------------------------------------------------------------------
so, I should try to boot, gdb debugging via NFS booting.
However, when booting form NFS, other problems will occur.
that is. KERNEL - PANIC.....
------------------------------------------------------------------------------------
net eth0: SMSC911x/921x identified at 0xf088e000, IRQ: 43
IP-Config: Complete:
device=eth0, addr=192.168.0.111, mask=255.255.255.0,
gw=192.168.0.254,
host=192.168.0.111, domain=, nis-domain=(none),
bootserver=192.168.0.100, rootserver=192.168.0.100, rootpath=
DBUG_PORT must not use AFC!
Looking up port of RPC 100003/2 on 192.168.0.100
Looking up port of RPC 100005/1 on 192.168.0.100
VFS: Mounted root (nfs filesystem) on device 0:14.
Freeing init memory: 156K
init: cannot open '/initlogo.rle'
Kernel panic - not syncing: Attempted to kill init!
------------------------------------------------------------------------------------
(kernel/exit.c)
so. I want to trace android ,kernel booting mecanism using gdb or
strace.
how can i do?
and how can I solve this problem?
NFS always problem......
(kernel source was provided Board company. Android source too.)
But I want to build, through Google.Reference source.
when booting from Board company source, that is good operating.
but my gingerbread source is trouble.
i think it is kernel problem. but only android source changed.
THIS IS MY NFS BOOTING MESSAGE.
------------------------------------------------------------------------------------
U-Boot 1.3.4 (Mar 23 2012 - 01:38:16) for MANGO210
CPU: S5PV210@1000MHz(OK)
APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 80MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: MANGO210
DRAM: 512 MB
SD/MMC: 7647MB
NAND: 256 MB
In: serial
Out: serial
Err: serial
checking mode for fastboot ...
U-Boot 1.3.4 (Mar 23 2012 - 01:38:16) for MANGO210
CPU: S5PV210@1000MHz(OK)
APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 80MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: MANGO210
DRAM: 512 MB
SD/MMC: 7647MB
NAND: 256 MB
In: serial
Out: serial
Err: serial
checking mode for fastboot ...
Hit any key to stop autoboot: 0
smc911x: initializing
smc911x: detected LAN9220 controller
smc911x: phy initialized
smc911x: MAC 00:40:5c:26:0a:5b
TFTP from server 192.168.0.100; our IP address is 192.168.0.111
Filename 'Gingerbread.Patch.zImage'.
Load address: 0x21000000
Loading:
#################################################################
#################################################################
#################################################################
#################################################################
#####################################
done
Bytes transferred = 4351908 (0x4267a4)
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.35.7 (liverpool@laptop-server) (gcc version 4.4.1
(Sourcery G++ Lite 2009q3-67) ) #1 PREEMPT Mon Apr 2 16:38:24 KST 2012
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: MANGO210
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41001099
Memory policy: ECC disabled, Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000
V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is sclk_a2m (0), rate is 200000000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk: source is mout_mpll (6), rate is 66700000
sclk_mixer: source is sclk_dac (0), rate is 54000000
sclk_spdif: source is sclk_audio (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is ext_xtal (0), rate is 24000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_mdnie: source is ext_xtal (0), rate is 24000000
sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x20c6f000
s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
s5pv210: 6144000 bytes system memory reserved for fimc0 at 0x42400000
s5pv210: 6144000 bytes system memory reserved for fimc1 at 0x429dc000
s5pv210: 6144000 bytes system memory reserved for fimc2 at 0x42fb8000
s5pv210: 6144000 bytes system memory reserved for jpeg at 0x43594000
s5pv210: 6144000 bytes system memory reserved for fimd at 0x43b70000
s5pv210: 1536000 bytes system memory reserved for texstream at
0x4414c000
s5pv210: 1536000 bytes system memory reserved for pmem_gpu1 at
0x442c3000
s5pv210: 6144000 bytes system memory reserved for g2d at 0x4443a000
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
129536
Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.100:/home/
liverpool/src/Gingerbread/PATCH.by_park/NFSROOT, nolock
ip=192.168.0.111:192.168.0.100:192.168.0.254:255.255.255.0::eth0:off
init=/init console=ttySAC1,115200
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256MB 256MB = 512MB total
Memory: 398460k/398460k available, 125828k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0800000 - 0xfc000000 ( 184 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc002f000 ( 156 kB)
.text : 0xc002f000 - 0xc0760000 (7364 kB)
.data : 0xc0760000 - 0xc07a8660 ( 290 kB)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:393
VIC @fd000000: id 0x00041192, vendor 0x41
VIC @fd010000: id 0x00041192, vendor 0x41
VIC @fd020000: id 0x00041192, vendor 0x41
VIC @fd030000: id 0x00041192, vendor 0x41
mult[140737]
max_delta_ns[2937815369]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
console [ttySAC1] enabled
Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
pmstats at 00000000
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
mango210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000,
tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000,
tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000,
tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000,
tin=divclk, base 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.0: using pins 40 (SDA) and 41 (SCL)
i2c-gpio i2c-gpio.2: using pins 44 (SDA) and 45 (SCL)
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource clock_source_systimer
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PMU: registered new PMU device of type 0
MANGO210 wifi init function
MANGO210 RTC, (c) 2010 Samsung Electronics
mango210-rtc mango210-rtc: rtc disabled, re-enabling
mango210-rtc mango210-rtc: rtc core: registered s3c as rtc0
S5PV210 ADC driver, (c) 2010 Samsung Electronics
cpuidle: phy_regs_save:0x4fd7e000
Loaded driver for PL330 DMAC-0 s3c-pl330
DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
audit: initializing netlink socket (disabled)
type=2000 audit(0.792:1): initialized
ashmem: initialized
msgmni has been set to 778
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
s3cfb s3cfb: [fb2] dma: 0x43b70000, cpu: 0xf1000000, size: 0x005dc000
FIMD src sclk = 166750000
s3cfb s3cfb: registered successfully
Start display and show logo
ipwireless 1.1 by Stephen Blackheath, Ben Martel, Jiri Kosina and
David Sterba
PA FB = 0x43B70000, bits per pixel = 32
screen width=800 height=480 va=0xe3b70000 pa=0x43b70000
xres_virtual = 800, yres_virtual = 1920, xoffset = 0, yoffset = 0
fb_size=6144000
Back frameBuffer[0].VAddr=e3ce7000 PAddr=43ce7000 size=1536000
Back frameBuffer[1].VAddr=e3e5e000 PAddr=43e5e000 size=1536000
Back frameBuffer[2].VAddr=e3fd5000 PAddr=43fd5000 size=1536000
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a
S3C6400/10
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a
S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a
S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a
S3C6400/10
brd: module loaded
loop: module loaded
pmem_gpu1: 1 init
Android kernel panic handler initialized (bind=kpanic)
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB
3,3V 8-bit)
Creating 6 MTD partitions on "s5pv210-nand":
0x000000000000-0x000000100000 : "bootloader"
0x000000100000-0x000000600000 : "recovery"
0x000000600000-0x000000b00000 : "kernel"
0x000000b00000-0x000000e00000 : "ramdisk"
0x000000e00000-0x000008600000 : "system"
0x000008600000-0x000010000000 : "userdata"
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01,
irq=-1)
net eth0: MAC Address: 96:5b:9c:31:68:43
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: s5pv210 EHCI
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5p-ohci s5p-ohci: s5pv210 OHCI
s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung
Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android init
android_probe pdata: c076cf78
android_bind
android_usb gadget: android_usb ready
f_acm init
android_register_function acm
f_adb init
android_register_function adb
f_mass_storage init
fsg_probe pdev: c076bdf0, pdata: c076cf9c
android_register_function usb_mass_storage
f_mtp init
android_register_function mtp
f_rndis init
android_register_function rndis
rndis_function_bind_config MAC: 00:00:00:00:00:00
android_usb gadget: using random self ethernet address
android_usb gadget: using random host ethernet address
usb0: MAC 9a:ee:1e:73:98:89
usb0: HOST MAC 92:4d:00:ca:f5:46
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
lun0: LUN: removable file: (no medium)
adb_bind_config
mtp_bind_config
mice: PS/2 mouse device common for all mice
input: mango-keys as /devices/platform/mango-keys.0/input/input0
start MANGO GPIO Button V1.1
vd5376 0-0053: vd5376 initialization failed
vd5376 2-0053: vd5376 initialization failed
S5P Touchscreen driver, (c) 2008 Samsung Electronics
S5P TouchScreen got loaded successfully : 12 bits
input: S5P TouchScreen as /devices/virtual/input/input1
using rtc device, s3c, for alarms
i2c /dev entries driver
Linux video capture interface: v2.00
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2009 Samsung Electronics
S5PC11X CEC Driver, (c) 2009 Samsung Electronics
s3c_bat_init
sec-fake-battery sec-fake-battery: s3c_bat_probe
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-
de...@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
wm8960 0-001a: No platform data supplied
android_usb gadget: high speed config #1: Android Composite
mmc0: new high speed SDIO card at address 0001
s3c_idma_preallocate_buffer: VA-f08c0000 PA-C0000000 163840bytes
asoc: WM8960 <-> s3c64xx-i2s mapping ok
s3c_idma_preallocate_buffer: VA-f0900000 PA-C0000000 163840bytes
asoc: WM8960 <-> s3c64xx-i2s mapping ok
mmc2: new high speed SDHC card at address b368
mmcblk0: mmc2:b368 USD 7.46 GiB
mmcblk0: p1 p2 p3
ASoC: Failed to create HP-L/R debugfs file
ASoC: Failed to create Speaker-L/R debugfs file
asoc: DIT <-> samsung-spdif mapping ok
ALSA device list:
#0: mango (WM8960)
#1: SMDK (spdif-dit)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (6225 buckets, 24900 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
ThumbEE CPU extension supported.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev
2
mango210-rtc mango210-rtc: rtc disabled, re-enabling
mango210-rtc mango210-rtc: setting system clock to 2011-01-01 12:00:02
UTC (1293883202)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
<6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
[CRZ] SD/MMC channel 2 bus width : 1
[CRZ] sdhci_s3c_set_clock max_clock 47642857
[CRZ] SD/MMC channel 2 bus width : 1
[CRZ] SD/MMC channel 2 bus width : 1
net eth0: SMSC911x/921x identified at 0xf088e000, IRQ: 43
IP-Config: Complete:
device=eth0, addr=192.168.0.111, mask=255.255.255.0,
gw=192.168.0.254,
host=192.168.0.111, domain=, nis-domain=(none),
bootserver=192.168.0.100, rootserver=192.168.0.100, rootpath=
DBUG_PORT must not use AFC!
Looking up port of RPC 100003/2 on 192.168.0.100
Looking up port of RPC 100005/1 on 192.168.0.100
VFS: Mounted root (nfs filesystem) on device 0:14.
Freeing init memory: 156K
init: cannot open '/initlogo.rle'
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 5 seconds..▒▒▒▒▒▒OK
------------------------------------------------------------------------------------
--
unsubscribe: android-kernel+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-kernel
--
unsubscribe: android-kernel+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-kernel
