Hi.... I formatted my card such that it has only 1 partition and this partition is of vfat type... In this i copied the uImage(i had renamed as u suggested),MLO and u-boot.bin i also tried with the uImage and the binaries that they provided,android-beagle.ubi and 0xkernel-beagle.bin
How can i verify whether i have formatted it correctly?i am sorry for asking silly doubts but please help... thanks a lot! On Tue, Sep 15, 2009 at 6:17 PM, Jim Huang <jserv...@gmail.com> wrote: > > 2009/9/15 sanyanniesunney anniesunney <laurelsgal...@gmail.com>: > > U-Boot 1.3.3 (Jul 10 2008 - 16:33:09) > > > > OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz > > OMAP3 Beagle Board + LPDDR/NAND > > DRAM: 128 MB > > NAND: 256 MiB > > In: serial > > Out: serial > > Err: serial > > Audio Tone on Speakers ... complete > > Hit any key to stop autoboot: 0 > > reading uImage > > > > Ok, it recognizes the kernel image. > > > 693740 bytes read > > ## Booting kernel from Legacy Image at 80300000 ... > > Image Name: Linux-2.6.29-omap1-g9985b01-dirt > > Image Type: ARM Linux Kernel Image (uncompressed) > > Data Size: 1956720 Bytes = 1.9 MB > > Load Address: 80008000 > > Entry Point: 80008000 > > Verifying Checksum ... Bad Data CRC > > ERROR: can't get kernel image! > > > > Could you please clarify if your SD card is well formatted or not? > It usually comes with physical problem instead of software. > > Sincerely, > Jim Huang (jserv) > http://0xlab.org/ > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---