Hi all, Which file is being referred here...i mean which file should be renamed? how can i get a new position...is it through issuing the command given by Pavan (i.e)
fatload mmc 0 80600000 <file_name> - to copy the contents of file "file_name" from mmc device 0 to RAM address 80600000? here is filename uImage? Thanks a lot for your help.... On Tue, Sep 15, 2009 at 6:54 PM, Michael Trimarchi < trimar...@gandalf.sssup.it> wrote: > > Hi, > > sanyanniesunney anniesunney wrote: > > Hi.... > > I formatted my card such that it has only 1 partition and this > > partition is of vfat type... > > In this i copied the uImage(i had renamed as u suggested),MLO and > > u-boot.bin > > i also tried with the uImage and the binaries that they > > provided,android-beagle.ubi and > > 0xkernel-beagle.bin > The uboot vfat subsystem has a series of BUG so if the uImage go in > unreadeadble region just doesnt' > work. Try to copy again and rename the oldfile, try to find some good > position. Basically a fresh formatted > partition gives no problem > > Michael > > > > > > How can i verify whether i have formatted it correctly?i am sorry for > > asking silly doubts but please help... > > > > thanks a lot! > > > > On Tue, Sep 15, 2009 at 6:17 PM, Jim Huang <jserv.tw > > <http://jserv.tw>@gmail.com <http://gmail.com>> wrote: > > > > > > 2009/9/15 sanyanniesunney anniesunney <laurelsgal...@gmail.com > > <mailto:laurelsgal...@gmail.com>>: > > > U-Boot 1.3.3 (Jul 10 2008 - 16:33:09) > > > > > > OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz > > > OMAP3 Beagle Board + LPDDR/NAND > > > DRAM: 128 MB > > > NAND: 256 MiB > > > In: serial > > > Out: serial > > > Err: serial > > > Audio Tone on Speakers ... complete > > > Hit any key to stop autoboot: 0 > > > reading uImage > > > > > > > Ok, it recognizes the kernel image. > > > > > 693740 bytes read > > > ## Booting kernel from Legacy Image at 80300000 ... > > > Image Name: Linux-2.6.29-omap1-g9985b01-dirt > > > Image Type: ARM Linux Kernel Image (uncompressed) > > > Data Size: 1956720 Bytes = 1.9 MB > > > Load Address: 80008000 > > > Entry Point: 80008000 > > > Verifying Checksum ... Bad Data CRC > > > ERROR: can't get kernel image! > > > > > > > Could you please clarify if your SD card is well formatted or not? > > It usually comes with physical problem instead of software. > > > > Sincerely, > > Jim Huang (jserv) > > http://0xlab.org/ > > > > > > > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---