Hi Jim, As i said earlier,we require Android 1.5 version.The guide you mentioned has ported Android 1.1 which is not supporting the applications we have developed.
Thanks, Sany On Tue, Sep 15, 2009 at 10:14 PM, shankarGanesh <shankargane...@gmail.com>wrote: > > Jim Huang wrote: > > 2009/9/15 sanyanniesunney anniesunney <laurelsgal...@gmail.com>: > >> mmc0: new high speed SD card at address b368 > >> mmcblk0: mmc0:b368 SDC 970 MiB > >> mmcblk0: p1 > >> Welcome to 0xdroid Image Installer > >> > > > > It looks that SD card was about to be mounted. > > > >> Mounting SD card... > >> mount: mounting /dev/mmcblk0p1 on /mmcblk0p1 failed: Device or resource > busy > >> Press [Enter] to activate shell > >> Erase NAND flash (File System) > >> Input file is not page-aligned. Use the padding option. > >> Data was only partially written due to error > >> : Success > >> /write_flash: exit: line 14: Illegal number: -1 > >> Writing android-beagle.ubi into NAND flash... > >> > > > > Thanks for your report. We at 0xlab mainly tested on Beagleboard rev > > C2. Few rev B? series were partially tested. > > I have used Embinux Android port and it worked fine on B2 board > > http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board > > > > > To help you know about the details, I think you should have more > > background knowledge about Beagleboard and Linux. Ångström is a good > > start point: > > http://www.angstrom-distribution.org/ > > > > Of course, Beagleboard website: > > http://beagleboard.org/ > > > > Since the list is regarding android pointing, we ought to focus on > > porting itself. > > > > Sincerely, > > Jim Huang (jserv) > > http://0xlab.org/ > > > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
