Yes i tried this. Even after doing this i am getting these errors:
E/vold ( 620): Unable to open '/sys/class/switch' (No such file or directory) E/vold ( 620): Cannot start volume '/sdcard' (volume is not bound) E/vold ( 620): Unable to open '/sys/class/switch' (No such file or directory), this error i am able to overcome by enabling the switch class in kernel. But i am still stuck at this second error, E/vold ( 620): Cannot start volume '/sdcard' (volume is not bound) But just to inform if i try manually the below command, the mount happens $mount -t vfat /dev/block/mmcblk1p1 /sdcard Regards, Sreedhar On Tue, Nov 10, 2009 at 11:52 AM, abukustfan <abukust...@gmail.com> wrote: > Did you try this? > > https://gforge.ti.com/gf/project/omapandroid/mailman/?_forum_action=ForumMessageBrowse&thread_id=1640&action=ListThreads&mailman_id=22 > > On Nov 10, 2:43 pm, sreedhar b <sreedhar...@gmail.com> wrote: > > Hi, > > > > This is the modified vold.conf which i am using , > > > > ## vold configuration file for the emulator/SDK > > volume_sdcard { > > ## This is the direct uevent device path to the SD slot on the device > > media_path /devices/MMC/mmc_host/mmc1 > > media_type mmc > > mount_point /sdcard > > ums_path /devices/platform/usb_mass_storage/lun0 > > > > } > > > > Regards, > > Sreedhar > > > > On Tue, Nov 10, 2009 at 8:27 AM, abukustfan <abukust...@gmail.com> > wrote: > > > Hi, > > > > > Did you modified your vold.conf? > > > > > On Nov 9, 11:19 pm, sreedhar b <sreedhar...@gmail.com> wrote: > > > > Sorry the mmc partition in my system is different. > > > > > > The correct command i am using : > > > > mount -t vfat /dev/block/mmcblk1p1 /sdcard , > > > > > > earlier i wrongly said as > > > > mount -t vfat /dev/block/mmcblk0 /sdcard > > > > > > Regards, > > > > Sreedhar > > > > > > On Mon, Nov 9, 2009 at 3:53 PM, sreedhar b <sreedhar...@gmail.com> > > > wrote: > > > > > Hi All, > > > > > > > I am seeing similar problem as is highlighted in the below link in > my > > > > > environment, > > > > > > http://groups.google.com/group/android-developers/msg/9e4c3176ef685f9e > > > > > > > 1. Manual mounting of sdcard > > > > > > > If i run the below command manually after the android boots up, > > > > > $mount -t vfat /dev/block/mmcblk0 /sdcard > > > > > > > Then only the sdcard is getting mounted and as mentioned in the > above > > > link, > > > > > I also see Gallery and Camera do not recognize the SD card even > it's > > > > > mounted this way. > > > > > > > 2. No manual mounting of sdcard > > > > > > > While not doing this manually which is what ideally expected, i > got > > > the > > > > > following errors and the sdcard is not mounted > > > > > > > The log gives some error like this > > > > > E/vold ( 620): Unable to open '/sys/class/switch' (No such file > or > > > > > directory) > > > > > E/vold ( 620): Cannot start volume '/sdcard' (volume is not > bound) > > > > > > > Please let me know how to overcome this issue. I faced the same > issue > > > with > > > > > Cupcake and also with Donut 1.6 r1 now. > > > > > > > Regards, > > > > > Sreedhar > > > > > -- > > > unsubscribe: > > > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > <android-porting%2bunsubscr...@googlegroups.com<android-porting%252bunsubscr...@googlegroups.com> > > > > > website:http://groups.google.com/group/android-porting > > > > > > -- > unsubscribe: > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > website: http://groups.google.com/group/android-porting > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting