Well, If I remember well, some networks aren't terminating calls
explicitely when the remote party is hanging up... I remember that
this was the case on BT cellnet in the UK about 10 years ago... Could
it be that one of the network where you are could still be configured
like that, don't know...
What happens if you put your sim card into a reference phone? Does it
release the call? If not, then I don't think there is much you can
do... (maybe try on a different network?)
If the reference phone releases the call, then you should study your
modem documentation to see if there is a way to configure these
notifications... If not, then you may have to poll the call state
regularly with a command like at+clcc
M.
On Mar 25, 2:29 pm, animesh arora <animesharora...@gmail.com> wrote:
> Can you tell me more clear what you told in this sentance
> " network thing, which is not explicitely terminating calls when the remote
> party hangs up."
> Please let me know how we can solve this problem.
>
> On Fri, Mar 25, 2011 at 7:26 AM, animesh arora
> <animesharora...@gmail.com>wrote:
>
>
>
>
>
>
>
> > ya its happening for all the calls either incoming or outgoing the call
> > timer GUI will not go even we will cut the call from other side.
>
> > On Thu, Mar 24, 2011 at 9:12 AM, Maffiou <maff...@gmail.com> wrote:
>
> >> There are several possible things:
>
> >> Does the problem happen on outgoing calls as well as incoming calls (
> >> all remote hangup, of course)
>
> >> If it's only on incoming call, you may need to check if your modem is
> >> generating multiple ring indications, i think there is a setting you
> >> can use to let the framework know.
>
> >> If it's on all calls, then it may be a network thing, which is not
> >> explicitely terminating calls when the remote party hangs up. BT
> >> Cellnet used to do that, maybe that still the case on some networks...
>
> >> In all, a set of logs would tell you.
>
> >> M.
>
> >> On 24 March 2011 15:37, animesh arora <animesharora...@gmail.com> wrote:
> >> > Now able to recieve and send call,but in both the cases the call timer
> >> will
> >> > not stop even we will cut the call from other side.
> >> > Is there any more service we need to run?
>
> >> > On Thu, Mar 17, 2011 at 8:25 AM, Maffiou <maff...@gmail.com> wrote:
>
> >> >> Have you provisioned voice call in your sqlite DB?
>
> >> >> In an adb root shell:
>
> >> >> $ cd /data/data/com.android.providers.settings/databases
> >> >> $ sqlite3 settings.db
> >> >> <sqlite> INSERT INTO secure (name, value) VALUES
> >> >> ('device_provisioned', 1);
> >> >> <sqlite> .exit
> >> >> $ reboot
>
> >> >> I think that should probably take care of your problem.
>
> >> >> m.
>
> >> >> On 17 March 2011 15:02, animesh arora <animesharora...@gmail.com>
> >> wrote:
> >> >> > Its surley supports voice calls,for time beeing i am commenting the
> >> >> > AT+CHLD=0,so able to get call continously,but not able to get why
> >> >> > incoming
> >> >> > call screen is not coming???
>
> >> >> > Can anybody suggest how we can debug the code for telephony to ril
> >> code
> >> >> > flow.
>
> >> >> > On Thu, Mar 17, 2011 at 1:13 AM, arindam das <das.ar...@gmail.com>
> >> >> > wrote:
>
> >> >> >> dude..i dnt know which board you are using for testing and it gives
> >> you
> >> >> >> any port to debug android ril realtime or not....
> >> >> >> but im pretty much sure you have to start getting accustomed with
> >> logs
> >> >> >> for
> >> >> >> debugging
>
> >> >> >> On Wed, Mar 16, 2011 at 9:35 PM, animesh arora
> >> >> >> <animesharora...@gmail.com>
> >> >> >> wrote:
>
> >> >> >>> That only i am not getting.Log only is not helpful to debug.Need
> >> >> >>> inside
> >> >> >>> technical solution how we can do it.
> >> >> >>> Have anybody debuged these type for problems for RIL?????
>
> >> >> >>> On Wed, Mar 16, 2011 at 9:00 AM, arindam das <das.ar...@gmail.com>
> >> >> >>> wrote:
>
> >> >> >>>> collect one log...will be interesting to see how telephony
> >> framework
> >> >> >>>> can
> >> >> >>>> reject a call automaticaly....my hunch is its getting any unsol
> >> >> >>>> indication
> >> >> >>>> from the modem.
>
> >> >> >>>> ima afraid that logs are the only possible way to debug. :(
>
> >> >> >>>> -ari
>
> >> >> >>>> On Wed, Mar 16, 2011 at 8:58 PM, animesh arora
> >> >> >>>> <animesharora...@gmail.com> wrote:
>
> >> >> >>>>> Call is automatically droping whenever i am trying to call that
> >> >> >>>>> no.after 2 rings.its automatically using AT+CHLD=0,and droping
> >> the
> >> >> >>>>> call.Not
> >> >> >>>>> able to find why it is going automatically in that case of
> >> >> >>>>> reference-ril.
>
> >> >> >>>>> Can anyone suggest how we can check the flow for these type of
> >> >> >>>>> Unsollicited calls like incoming call,incoming SMS.Is there any
> >> >> >>>>> proper way
> >> >> >>>>> to check it.And how it is communicating through JNI/JAVA for
> >> these
> >> >> >>>>> UNSOLICITED calls.i know it is using socket,but is there any
> >> >> >>>>> procedure to
> >> >> >>>>> check this flow,and where we are strucking.
>
> >> >> >>>>> Please let me know any type of Debugger also for target debugging
> >> >> >>>>> for
> >> >> >>>>> RIL.
>
> >> >> >>>>> Regards
>
> >> >> >>>>> ANI.
>
> >> >> >>>>> On Tue, Mar 8, 2011 at 2:42 AM, arindam das <das.ar...@gmail.com
>
> >> >> >>>>> wrote:
>
> >> >> >>>>>> SIM_IO is used for reading writing to sim e.g. MS-ISDN
> >> list,reading
> >> >> >>>>>> writing SMSC number,reading writing sim contacts,try to capture
> >> >> >>>>>> some
> >> >> >>>>>> logs..without which it will very difficult to suggest anything
>
> >> >> >>>>>> On Mon, Mar 7, 2011 at 3:00 PM, animesh arora
> >> >> >>>>>> <animesharora...@gmail.com> wrote:
>
> >> >> >>>>>>> Now i able to make a call with my device no. after commenting
> >> >> >>>>>>> SIM_IO
> >> >> >>>>>>> functionality,but i am not able to recieve the call, if i am
> >> >> >>>>>>> calling through
> >> >> >>>>>>> my mobile to that device no..only 2 rings are going after that
> >> >> >>>>>>> call is
> >> >> >>>>>>> droping out.
> >> >> >>>>>>> What may be the issue.
> >> >> >>>>>>> What will be the uses of SIM_IO functionality,which i
> >> commented,is
> >> >> >>>>>>> it
> >> >> >>>>>>> useful for recieving the call????
>
> >> >> >>>>>>> Regards
>
> >> >> >>>>>>> ANI.
>
> >> >> >>>>>>> On Fri, Mar 4, 2011 at 7:07 PM, arindam das <
> >> das.ar...@gmail.com>
> >> >> >>>>>>> wrote:
>
> >> >> >>>>>>>> JAVA logs are coming by default but not the refernce ril log.
>
> >> >> >>>>>>>> go to hardware/ril/reference-ril.c
>
> >> >> >>>>>>>> and check log_tag is defined or not??
> >> >> >>>>>>>> If in this file LOG_TAG is defined something other than
> >> >> >>>>>>>> "RIL",then u
> >> >> >>>>>>>> have to give
> >> >> >>>>>>>> logcat-b radio&logcat& to get log
>
> >> >> >>>>>>>> similarly in same path u can check for the at parser files for
> >> >> >>>>>>>> the
> >> >> >>>>>>>> logs.
>
> >> >> >>>>>>>> I presume due to some at commands ur modem is hanging and
> >> nothing
> >> >> >>>>>>>> proceeds...
>
> >> >> >>>>>>>> On Fri, Mar 4, 2011 at 6:27 PM, animesh arora
> >> >> >>>>>>>> <animesharora...@gmail.com> wrote:
>
> >> >> >>>>>>>>> where we can enable AT log message by default it is coming
> >> for
> >> >> >>>>>>>>> RIL
> >> >> >>>>>>>>> layer,i dont know where we can enable for JAVA layer which i
> >> am
> >> >> >>>>>>>>> getting
> >> >> >>>>>>>>> after pressing the call button.
> >> >> >>>>>>>>> On Fri, Mar 4, 2011 at 6:04 PM, arindam das
> >> >> >>>>>>>>> <das.ar...@gmail.com>
> >> >> >>>>>>>>> wrote:
>
> >> >> >>>>>>>>>> animesh,
> >> >> >>>>>>>>>> i could not see any AT log ....please enable the logs first
> >> and
> >> >> >>>>>>>>>> collect one
>
> >> >> >>>>>>>>>> second thing is comment out sim_io
>
> >> >> >>>>>>>>>> On Fri, Mar 4, 2011 at 5:58 PM, animesh arora
> >> >> >>>>>>>>>> <animesharora...@gmail.com> wrote:
>
> >> >> >>>>>>>>>>> Hi Arrin/Moffiou
>
> >> >> >>>>>>>>>>> Please tell me clearly i what i need to comment out,are you
> >> >> >>>>>>>>>>> telling about to comment out the particular SIMIO related
> >> AT
> >> >> >>>>>>>>>>> Command.
>
> >> >> >>>>>>>>>>> Tell me is there possiblity of blocking GSM AT interfaced
> >> >> >>>>>>>>>>> channel,so i am not able to call.If yes tell me how we can
> >> >> >>>>>>>>>>> test it out
> >> >> >>>>>>>>>>> wheather it is got blocked or not?
>
> >> >> >>>>>>>>>>> Is there any procedure to test it out?
>
> >> >> >>>>>>>>>>> Regards
>
> >> >> >>>>>>>>>>> ANI
>
> >> >> >>>>>>>>>>> On Fri, Mar 4, 2011 at 12:08 PM, arindam das
> >> >> >>>>>>>>>>> <das.ar...@gmail.com> wrote:
>
> >> >> >>>>>>>>>>>> Hi Animesh,
> >> >> >>>>>>>>>>>> I can see in ur log
> >> >> >>>>>>>>>>>> D/RILJ ( 1748): [0067]> DIAL
>
> >> >> >>>>>>>>>>>> but it didnt result to any AT command(hoping that the IPC
> >> >> >>>>>>>>>>>> mechanism is AT).
>
> >> >> >>>>>>>>>>>> No log is coming from reference-ril.so(or whatever logtag
> >> you
> >> >> >>>>>>>>>>>> ahve given in reference-ril.c code)
>
> >> >> >>>>>>>>>>>> Please check first those logs are enabled or not...may be
> >> >> >>>>>>>>>>>> something is failing from there itself.
>
> >> >> >>>>>>>>>>>> And I totally agree with maffiou,comment out the
> >> >> >>>>>>>>>>>> SIM_IO(at+crsm
> >> >> >>>>>>>>>>>> calls) request from your ril code and check whether it
> >> >> >>>>>>>>>>>> proceeds with the MO
> >> >> >>>>>>>>>>>> call or not
>
> >> >> >>>>>>>>>>>> On Fri, Mar 4, 2011 at 11:50 AM, animesh arora
> >> >> >>>>>>>>>>>> <animesharora...@gmail.com> wrote:
>
> >> >> >>>>>>>>>>>>> Hi
>
> >> >> >>>>>>>>>>>>> Find the latest log for Making GSM call with the help of
> >> >> >>>>>>>>>>>>> dialer
> >> >> >>>>>>>>>>>>> in android.
>
> >> >> >>>>>>>>>>>>> Help me out for it i am getting this message after making
> >> a
> >> >> >>>>>>>>>>>>> call through dialer,is there any solution to make a
> >> call.Is
> >> >> >>>>>>>>>>>>> the log is
> >> >> >>>>>>>>>>>>> proper which i am getting after dial up a mobile no.???
>
> >> >> >>>>>>>>>>>>> # I/ActivityManager( 1650): Starting activity: Intent {
> >> >> >>>>>>>>>>>>> action=android.intent.action.MAIN
> >> >> >>>>>>>>>>>>> categories={android.intent.category.LAUNCHER}
> >> >> >>>>>>>>>>>>> flags=0x10200000
>
> >> comp={com.android.contacts/com.android.contacts.DialtactsActivity} }
> >> >> >>>>>>>>>>>>> I/ActivityManager( 1650): Displayed activity
>
> ...
>
> read more »
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
