Please check whether the communication channel (socket) between RIL.java and
this layer is hapening properly....put logs and then check...
On Sat, Apr 2, 2011 at 2:51 PM, animesh arora <animesharora...@gmail.com>wrote:
> All AT commands are properly suiting to my modem and getting the OK
> response also from modem side,what may be other issue at ril level?
>
>
> On Mon, Mar 28, 2011 at 1:33 AM, Maffiou <maff...@gmail.com> wrote:
>
>>
>>
>> On Mar 27, 6:04 pm, animesh arora <animesharora...@gmail.com> wrote:
>> > i dont think the service provider side will be any issue,its working in
>> my
>> > mobile.So is there any problem on JAVA (RIL.java) in framework any
>> problem?
>>
>> If you don't receive any end of call notification from the modem (I
>> think that what you said, but check your logcat!) then surely, the
>> framework can't guess that the call is over.. Pretty sure you problem
>> is a modem configuration issue.
>>
>> > DTMF Stop error is coming continuously.Is there any possibility that
>> audio
>> > service is not killing automatically when we are making /receiving call,
>> > because audio flinger still not working,so thats why call gui also not
>> going
>> > off automatically even we will cut the call.
>>
>> Are you talking about DTMF at ril level? These don't do any audio
>> locally, they just request the signalling to the remote party through
>> the modem. Once again, there is a chance that the reference RIL is not
>> suitable for your modem (it wasn't for mine !)
>>
>> >
>> > On Fri, Mar 25, 2011 at 11:15 AM, Maffiou <maff...@gmail.com> wrote:
>> > > Well, If I remember well, some networks aren't terminating calls
>> > > explicitely when the remote party is hanging up... I remember that
>> > > this was the case on BT cellnet in the UK about 10 years ago... Could
>> > > it be that one of the network where you are could still be configured
>> > > like that, don't know...
>> >
>> > > What happens if you put your sim card into a reference phone? Does it
>> > > release the call? If not, then I don't think there is much you can
>> > > do... (maybe try on a different network?)
>> >
>> > > If the reference phone releases the call, then you should study your
>> > > modem documentation to see if there is a way to configure these
>> > > notifications... If not, then you may have to poll the call state
>> > > regularly with a command like at+clcc
>> >
>> > > M.
>> >
>> > > On Mar 25, 2:29 pm, animesh arora <animesharora...@gmail.com> wrote:
>> > > > Can you tell me more clear what you told in this sentance
>> > > > " network thing, which is not explicitely terminating calls when the
>> > > remote
>> > > > party hangs up."
>> > > > Please let me know how we can solve this problem.
>> >
>> > > > On Fri, Mar 25, 2011 at 7:26 AM, animesh arora <
>> > > animesharora...@gmail.com>wrote:
>> >
>> > > > > ya its happening for all the calls either incoming or outgoing the
>> call
>> > > > > timer GUI will not go even we will cut the call from other side.
>> >
>> > > > > On Thu, Mar 24, 2011 at 9:12 AM, Maffiou <maff...@gmail.com>
>> wrote:
>> >
>> > > > >> There are several possible things:
>> >
>> > > > >> Does the problem happen on outgoing calls as well as incoming
>> calls (
>> > > > >> all remote hangup, of course)
>> >
>> > > > >> If it's only on incoming call, you may need to check if your
>> modem is
>> > > > >> generating multiple ring indications, i think there is a setting
>> you
>> > > > >> can use to let the framework know.
>> >
>> > > > >> If it's on all calls, then it may be a network thing, which is
>> not
>> > > > >> explicitely terminating calls when the remote party hangs up. BT
>> > > > >> Cellnet used to do that, maybe that still the case on some
>> networks...
>> >
>> > > > >> In all, a set of logs would tell you.
>> >
>> > > > >> M.
>> >
>> > > > >> On 24 March 2011 15:37, animesh arora <animesharora...@gmail.com
>> >
>> > > wrote:
>> > > > >> > Now able to recieve and send call,but in both the cases the
>> call
>> > > timer
>> > > > >> will
>> > > > >> > not stop even we will cut the call from other side.
>> > > > >> > Is there any more service we need to run?
>> >
>> > > > >> > On Thu, Mar 17, 2011 at 8:25 AM, Maffiou <maff...@gmail.com>
>> wrote:
>> >
>> > > > >> >> Have you provisioned voice call in your sqlite DB?
>> >
>> > > > >> >> In an adb root shell:
>> >
>> > > > >> >> $ cd /data/data/com.android.providers.settings/databases
>> > > > >> >> $ sqlite3 settings.db
>> > > > >> >> <sqlite> INSERT INTO secure (name, value) VALUES
>> > > > >> >> ('device_provisioned', 1);
>> > > > >> >> <sqlite> .exit
>> > > > >> >> $ reboot
>> >
>> > > > >> >> I think that should probably take care of your problem.
>> >
>> > > > >> >> m.
>> >
>> > > > >> >> On 17 March 2011 15:02, animesh arora <
>> animesharora...@gmail.com>
>> > > > >> wrote:
>> > > > >> >> > Its surley supports voice calls,for time beeing i am
>> commenting
>> > > the
>> > > > >> >> > AT+CHLD=0,so able to get call continously,but not able to
>> get why
>> > > > >> >> > incoming
>> > > > >> >> > call screen is not coming???
>> >
>> > > > >> >> > Can anybody suggest how we can debug the code for telephony
>> to
>> > > ril
>> > > > >> code
>> > > > >> >> > flow.
>> >
>> > > > >> >> > On Thu, Mar 17, 2011 at 1:13 AM, arindam das <
>> > > das.ar...@gmail.com>
>> > > > >> >> > wrote:
>> >
>> > > > >> >> >> dude..i dnt know which board you are using for testing and
>> it
>> > > gives
>> > > > >> you
>> > > > >> >> >> any port to debug android ril realtime or not....
>> > > > >> >> >> but im pretty much sure you have to start getting
>> accustomed
>> > > with
>> > > > >> logs
>> > > > >> >> >> for
>> > > > >> >> >> debugging
>> >
>> > > > >> >> >> On Wed, Mar 16, 2011 at 9:35 PM, animesh arora
>> > > > >> >> >> <animesharora...@gmail.com>
>> > > > >> >> >> wrote:
>> >
>> > > > >> >> >>> That only i am not getting.Log only is not helpful to
>> > > debug.Need
>> > > > >> >> >>> inside
>> > > > >> >> >>> technical solution how we can do it.
>> > > > >> >> >>> Have anybody debuged these type for problems for RIL?????
>> >
>> > > > >> >> >>> On Wed, Mar 16, 2011 at 9:00 AM, arindam das <
>> > > das.ar...@gmail.com>
>> > > > >> >> >>> wrote:
>> >
>> > > > >> >> >>>> collect one log...will be interesting to see how
>> telephony
>> > > > >> framework
>> > > > >> >> >>>> can
>> > > > >> >> >>>> reject a call automaticaly....my hunch is its getting any
>> > > unsol
>> > > > >> >> >>>> indication
>> > > > >> >> >>>> from the modem.
>> >
>> > > > >> >> >>>> ima afraid that logs are the only possible way to debug.
>> :(
>> >
>> > > > >> >> >>>> -ari
>> >
>> > > > >> >> >>>> On Wed, Mar 16, 2011 at 8:58 PM, animesh arora
>> > > > >> >> >>>> <animesharora...@gmail.com> wrote:
>> >
>> > > > >> >> >>>>> Call is automatically droping whenever i am trying to
>> call
>> > > that
>> > > > >> >> >>>>> no.after 2 rings.its automatically using AT+CHLD=0,and
>> > > droping
>> > > > >> the
>> > > > >> >> >>>>> call.Not
>> > > > >> >> >>>>> able to find why it is going automatically in that case
>> of
>> > > > >> >> >>>>> reference-ril.
>> >
>> > > > >> >> >>>>> Can anyone suggest how we can check the flow for these
>> type
>> > > of
>> > > > >> >> >>>>> Unsollicited calls like incoming call,incoming SMS.Is
>> there
>> > > any
>> > > > >> >> >>>>> proper way
>> > > > >> >> >>>>> to check it.And how it is communicating through JNI/JAVA
>> for
>> > > > >> these
>> > > > >> >> >>>>> UNSOLICITED calls.i know it is using socket,but is there
>> any
>> > > > >> >> >>>>> procedure to
>> > > > >> >> >>>>> check this flow,and where we are strucking.
>> >
>> > > > >> >> >>>>> Please let me know any type of Debugger also for target
>> > > debugging
>> > > > >> >> >>>>> for
>> > > > >> >> >>>>> RIL.
>> >
>> > > > >> >> >>>>> Regards
>> >
>> > > > >> >> >>>>> ANI.
>> >
>> > > > >> >> >>>>> On Tue, Mar 8, 2011 at 2:42 AM, arindam das <
>> > > das.ar...@gmail.com
>> >
>> > > > >> >> >>>>> wrote:
>> >
>> > > > >> >> >>>>>> SIM_IO is used for reading writing to sim e.g. MS-ISDN
>> > > > >> list,reading
>> > > > >> >> >>>>>> writing SMSC number,reading writing sim contacts,try
>> to
>> > > capture
>> > > > >> >> >>>>>> some
>> > > > >> >> >>>>>> logs..without which it will very difficult to suggest
>> > > anything
>> >
>> > > > >> >> >>>>>> On Mon, Mar 7, 2011 at 3:00 PM, animesh arora
>> > > > >> >> >>>>>> <animesharora...@gmail.com> wrote:
>> >
>> > > > >> >> >>>>>>> Now i able to make a call with my device no. after
>> > > commenting
>> > > > >> >> >>>>>>> SIM_IO
>> > > > >> >> >>>>>>> functionality,but i am not able to recieve the call,
>> if i
>> > > am
>> > > > >> >> >>>>>>> calling through
>> > > > >> >> >>>>>>> my mobile to that device no..only 2 rings are going
>> after
>> > > that
>> > > > >> >> >>>>>>> call is
>> > > > >> >> >>>>>>> droping out.
>> > > > >> >> >>>>>>> What may be the issue.
>> > > > >> >> >>>>>>> What will be the uses of SIM_IO functionality,which i
>> > > > >> commented,is
>> > > > >> >> >>>>>>> it
>> > > > >> >> >>>>>>> useful for recieving the call????
>> >
>> > > > >> >> >>>>>>> Regards
>> >
>> > > > >> >> >>>>>>> ANI.
>> >
>> > > > >> >> >>>>>>> On Fri, Mar 4, 2011 at 7:07 PM, arindam das <
>> > > > >> das.ar...@gmail.com>
>> > > > >> >> >>>>>>> wrote:
>> >
>> > > > >> >> >>>>>>>> JAVA logs are coming by default but not the refernce
>> ril
>> > > log.
>> >
>> > > > >> >> >>>>>>>> go to hardware/ril/reference-ril.c
>> >
>> > > > >> >> >>>>>>>> and check log_tag is defined or not??
>> > > > >> >> >>>>>>>> If in this file LOG_TAG is defined something other
>> than
>> > > > >> >> >>>>>>>> "RIL",then u
>> > > > >> >> >>>>>>>> have to give
>> > > > >> >> >>>>>>>> logcat-b radio&logcat& to get log
>> >
>> > > > >> >> >>>>>>>> similarly in same path u can check for the at parser
>> files
>> > > for
>> > > > >> >> >>>>>>>> the
>> > > > >> >> >>>>>>>> logs.
>> >
>> > > > >> >> >>>>>>>> I presume due to some at commands ur modem is hanging
>> and
>> > > > >> nothing
>> > > > >> >> >>>>>>>> proceeds...
>> >
>> > > > >> >> >>>>>>>> On Fri, Mar 4, 2011 at 6:27 PM, animesh arora
>> > > > >> >> >>>>>>>> <animesharora...@gmail.com> wrote:
>> >
>> > > > >> >> >>>>>>>>> where we can enable AT log message by default it is
>> > > coming
>> > > > >> for
>> > > > >> >> >>>>>>>>> RIL
>> > > > >> >> >>>>>>>>> layer,i dont know where we can enable for JAVA layer
>> > > which i
>> > > > >> am
>> > > > >> >> >>>>>>>>> getting
>> > > > >> >> >>>>>>>>> after pressing the call button.
>> > > > >> >> >>>>>>>>> On Fri, Mar 4, 2011 at 6:04 PM, arindam das
>> > > > >> >> >>>>>>>>> <das.ar...@gmail.com>
>> > > > >> >> >>>>>>>>> wrote:
>> >
>> > > > >> >> >>>>>>>>>> animesh,
>> > > > >> >> >>>>>>>>>> i could not see any AT log ....please enable the
>> logs
>> > > first
>> > > > >> and
>> > > > >> >> >>>>>>>>>> collect one
>> >
>> > > > >> >> >>>>>>>>>> second thing is comment out sim_io
>> >
>> > > > >> >> >>>>>>>>>> On Fri, Mar 4, 2011 at 5:58 PM, animesh arora
>> > > > >> >> >>>>>>>>>> <animesharora...@gmail.com> wrote:
>> >
>> > > > >> >> >>>>>>>>>>> Hi Arrin/Moffiou
>> >
>> > > > >> >> >>>>>>>>>>> Please tell me clearly i what i need to comment
>> out,are
>> > > you
>> > > > >> >> >>>>>>>>>>> telling about to comment out the particular SIMIO
>> > > related
>> > > > >> AT
>> > > > >> >> >>>>>>>>>>> Command.
>> >
>> > > > >> >> >>>>>>>>>>> Tell me is there possiblity of blocking GSM AT
>> > > interfaced
>> > > > >> >> >>>>>>>>>>> channel,so i am not able to call.If yes tell me
>> how we
>> > > can
>> > > > >> >> >>>>>>>>>>> test it out
>> > > > >> >> >>>>>>>>>>> wheather it is got blocked or not?
>> >
>> > > > >> >> >>>>>>>>>>> Is there any procedure to test it out?
>> >
>> > > > >> >> >>>>>>>>>>> Regards
>> >
>> > > > >> >> >>>>>>>>>>> ANI
>> >
>> > > > >> >> >>>>>>>>>>> On Fri, Mar 4, 2011 at 12:08 PM, arindam das
>> > > > >> >> >>>>>>>>>>> <das.ar...@gmail.com> wrote:
>> >
>> > > > >> >> >>>>>>>>>>>> Hi Animesh,
>> > > > >> >> >>>>>>>>>>>> I can see in ur log
>> > > > >> >> >>>>>>>>>>>> D/RILJ ( 1748): [0067]> DIAL
>> >
>> > > > >> >> >>>>>>>>>>>> but it didnt result to any AT command(hoping that
>> the
>> > > IPC
>> > > > >> >> >>>>>>>>>>>> mechanism is AT).
>> >
>> > > > >> >> >>>>>>>>>>>> No log is coming from
>> >
>> > ...
>> >
>> > read more ยป
>>
>> --
>> unsubscribe: android-porting+unsubscr...@googlegroups.com
>> website: http://groups.google.com/group/android-porting
>>
>
> --
> unsubscribe: android-porting+unsubscr...@googlegroups.com
> website: http://groups.google.com/group/android-porting
>
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
