Hi, Thanks for the reply. But I have changed the device entry in libsensor. But still I didn't see any progress in it.
On Fri, Aug 19, 2011 at 7:15 PM, Radu Iscu <linke...@gmail.com> wrote: > I'm not a sensor guru but logic says to different accelerometers might have > two different output formats and timings. > A normal program uses the android framework to access the accelerometer and > that should have a different implementation for each sensor. > I'm not sure this is it, but that's my guess. > > Good luck. > > > On 19 August 2011 11:51, ramya mohan <jira...@gmail.com> wrote: > >> Hi all, >> >> I am trying to integrate an accelerometer sensor with OMAP4 based >> board. Most of the interfaces are similar to Blaze board. The >> accelerometer sensor we are using is different from Blaze. The sensor >> is working from kernel side. We tested using evTest. In >> android(Gingerbread), blaze has a app that will display the values >> when u enable the particular sensor. I checked the sources of it. I >> changed the sysfs entry of the blaze board accelerometer to our board >> sysfs entry in the sources. >> >> But I couldn't see any output with respect to accelerometer. Am I >> missing something. If so , correct me. Thanks in advance. >> >> Regards, >> Ramya.M >> >> -- >> unsubscribe: android-porting+unsubscr...@googlegroups.com >> website: http://groups.google.com/group/android-porting >> > > > > -- > Radu Iscu > Tel: 0742082607 > > > > > -- > Radu Iscu > Tel: 0742082607 > > -- > unsubscribe: android-porting+unsubscr...@googlegroups.com > website: http://groups.google.com/group/android-porting > -- With care Ramya -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting