On Sat, 14 Jul 2001 20:36:43 -0400, Glenn McCorkle wrote:
> Clarkson University Terminal Emulator [CUTE:2.2D/TC-D]
> Alt-H presents a summary of special keys
> Packet driver (PPPD220F)
> Class 1 Type 0 Version b Extended 2
> My Etheraddress: 0:2:12:0:56:34
> Sending BOOTPs: (Press <SPACEBAR> to give up.)
> ..Valid BOOTP Packet ReceivedBootP: Reply from server IP [204.179.144.162]
> BootP: My IP [207.17.248.164] Gateway IP [204.179.144.162]
> BootP: RFC1048 Style BootP Packet Received
> BootP: Subnet is 252.0.0.0
> BootP: Adding Gateway number 1 IP 204.179.144.162
> BootP: Adding Nameserver number 1 IP 204.179.144.2
> BootP: Adding Nameserver number 2 IP 204.179.144.150
> My Ethernet address: 0:2:12:0:56:34
> My IP address: 207.17.248.164
> Keyboard type is extended.
> Server mode, press ESC to exit or ALT-A to begin a session
> Enter new machine name, address or @scriptfile (machine [optional portnumber])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
HEY !
Where did you get THAT line from ?
My Arachne Telnet doesn't display ANYTHING after ALT-A to begin session. :((
Here's MY screencap:
Clarkson University Tcp Communication Package
Clarkson University Terminal Emulator [CUTE:2.2D/TC-D]
Alt-H presents a summary of special keys
Packet driver (LADSoftPPP$)
Class 1 Type 0 Version 100 Extended 2
My Etheraddress: 4c:4c:4c:c4:c4:c4
Sending BOOTPs: (Press <SPACEBAR> to give up.)
.Valid BOOTP Packet ReceivedBootP: Reply from server IP [199.212.94.72]
BootP: My IP [199.212.94.151] Gateway IP [199.212.94.72]
BootP: RFC1048 Style BootP Packet Received
BootP: Subnet is 255.255.255.0
BootP: Adding Gateway number 1 IP 199.212.94.72
BootP: Adding Nameserver number 1 IP 199.212.94.65
BootP: Adding Nameserver number 2 IP 199.212.94.65
My Ethernet address: 4c:4c:4c:c4:c4:c4
My IP address: 199.212.94.151
Keyboard type is extended.
Server mode, press ESC to exit or ALT-A to begin a session
.........................
And there is nothing offscreen either. When I hit spacebar I get a
message like: Session must be in progress to access other commands.
Then a repeat of the Server mode line.
- Clarence Verge
- Back to using Arachne V1.62 ....
