>> Or maybe we should send an ACK to them -- I need to read the SIP RFC... >> > >Tried that, doesn't work. > >I should add that in my config I'm totally behind NAT, both asterisk and >an ATA186 that talks to it. > >So that may be confounding me in terms of what I'm seeing.
I do see the same problem: after a few minutes, the call is dropped (this is using Asterisk patched to ignore 480 "Temporarily not available" errors). From the log below it _seems_ like iConnectHere is waiting for an acknowledgment to the 480, but you noted that you tried this? It seems to be purely a signalling problem as the call is setup fine between the SIP phone and the gateway (which in this case appeared to be somewhere in Austria...) -- Executing Macro("SIP/515-Office-b8b1", "iconnecthere|33145207135|60") in new stack -- Executing Dial("SIP/515-Office-b8b1", "SIP/[EMAIL PROTECTED]|60|r") in new stack -- Called [EMAIL PROTECTED] -- SIP/iconnecthere-ec91 is ringing -- SIP/iconnecthere-ec91 answered SIP/515-Office-b8b1 -- Attempting native bridge of SIP/515-Office-b8b1 and SIP/iconnecthere-ec91 -- Got SIP response 408 "Request Timeout" back from 213.137.73.178 == Spawn extension (macro-iconnecthere, s, 1) exited non-zero on 'SIP/515-Office-b8b1' in macro 'iconnecthere' == Spawn extension (local, 933145207135, 1) exited non-zero on 'SIP/515-Office-b8b1' -- Luke -- Luke Howard | PADL Software Pty Ltd | www.padl.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users