Is there a Record-Route header in the response that comes back from iconnect?
Mark On Sun, 23 Mar 2003, Luke Howard wrote: > > >> Or maybe we should send an ACK to them -- I need to read the SIP RFC... > >> > > > >Tried that, doesn't work. > > > >I should add that in my config I'm totally behind NAT, both asterisk and > >an ATA186 that talks to it. > > > >So that may be confounding me in terms of what I'm seeing. > > I do see the same problem: after a few minutes, the call is dropped (this is > using Asterisk patched to ignore 480 "Temporarily not available" errors). From > the log below it _seems_ like iConnectHere is waiting for an acknowledgment > to the 480, but you noted that you tried this? It seems to be purely a > signalling problem as the call is setup fine between the SIP phone and the > gateway (which in this case appeared to be somewhere in Austria...) > > -- Executing Macro("SIP/515-Office-b8b1", "iconnecthere|33145207135|60") in new > stack > -- Executing Dial("SIP/515-Office-b8b1", "SIP/[EMAIL PROTECTED]|60|r") in new stack > -- Called [EMAIL PROTECTED] > -- SIP/iconnecthere-ec91 is ringing > -- SIP/iconnecthere-ec91 answered SIP/515-Office-b8b1 > -- Attempting native bridge of SIP/515-Office-b8b1 and SIP/iconnecthere-ec91 > -- Got SIP response 408 "Request Timeout" back from 213.137.73.178 > == Spawn extension (macro-iconnecthere, s, 1) exited non-zero on > 'SIP/515-Office-b8b1' in macro 'iconnecthere' > == Spawn extension (local, 933145207135, 1) exited non-zero on 'SIP/515-Office-b8b1' > > -- Luke > > -- > Luke Howard | PADL Software Pty Ltd | www.padl.com > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users