No, it's not supported, nor can I imagine it will be. If you're using NAT, use IAX2 :)
Mark On Tue, 1 Jul 2003, John Todd wrote: > No, I have not tested alternatives. Perhaps Mark can interject a > comment here on if he has REINVITEs working for devices behind > different NATs or if that is on the agenda? I haven't experimented > widely on SIP/NAT interactions since it became stable in the CVS code. > > JT > > > >John, > > > >Thanks for the detailed guide. > > > >As you mentioned, the situation where two ATAs behind NAT want to establish > >a direct connection is not resolved yet. In that case, the canreinvite would > >have to be set to no and some other solution outside of * would have to be > >used to traverse the NAT. Have you tested any alternatives? > > > >Rgds > >Dan > >----- Original Message ----- > >From: "John Todd" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Sunday, June 29, 2003 7:35 PM > >Subject: [Asterisk-Users] Cisco ATA-186 config guide for Asterisk > > > > > >> > >> I really should be doing something better on this beautiful weekend, > >> but I'm trying to save myself some time for later projects by > >> documenting some things that have been particularly troublesome in > >> the past. That being said... > >> > >> I've written up a configuration guide for the Cisco ATA-186, which > >> describes some of the features that are possible to set in the ATA > >> and specifically what needs to be done to get it working with > >> Asterisk. > >> > >> It's not pretty, it's not HTML, but it's a lot of hints that I've > >> collected from the list and other sources over the last year or so: > >> > >> http://www.loligo.com/asterisk/Cisco/ATA-186-guide.v20030628.txt > >> > >> > > > JT > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users