Unfortunatelly if your telco doesn't send you any DID along with the SETUP message you need to have immediate=yes in zapata.conf for those channels.
regards Martin On Fri, 11 Jul 2003 [EMAIL PROTECTED] wrote: > Very sorry about the previous mail, > heres the mail again, > > hi Everyone, > > We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and > starts the > asterisk, cards also starts fine, givin following output, > > *CLI> > == D-Channel on span 1 up > -- B-channel 1 successfully restarted on span 1 > -- B-channel 2 successfully restarted on span 1 > . . . > -- B-channel 31 successfully restarted on span 1 > > but, when we make a call to this E1 from outside, it gives the following error, > > WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not > found? > WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 1 > WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not > found? > WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 2 > > does anybody hav an idea on this? > > our zaptel.conf is, > > #E100p card > span=1,0,0,ccs,hdb3,crc4 > bchan=1-15,17-31 > dchan=16 > > zapata.conf, > > ;E100p card > switchtype=EuroISDN > signalling=pri_cpe > pridialplan=unknown > context=incoming > group = 2 > channel => 1-15,17-31 > > Thanks inadvance, > > Surajee > > > > --------------This mail sent through OmniBIS.com-------------- > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
