hi Everyone,
We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,
*CLI> == D-Channel on span 1 up -- B-channel 1 successfully restarted on span 1 -- B-channel 2 successfully restarted on span 1 . . . -- B-channel 31 successfully restarted on span 1
but, when we make a call to this E1 from outside, it gives the following error,
WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not found?
WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 1
WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not found?
WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 2
does anybody hav an idea on this?
our zaptel.conf is,
#E100p card span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16
zapata.conf,
;E100p card switchtype=EuroISDN signalling=pri_cpe pridialplan=unknown context=incoming group = 2 channel => 1-15,17-31
Thanks inadvance,
Surajee
--------------This mail sent through OmniBIS.com-------------- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
I was having the same problem because : 1 number for E1 and the local PTSN was not sending the DID to select the appropriate extension. Set the immediate=yes into zapata.conf and catch the call into s extension! Thanks to Martin Pycko ...
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users