Since then I couldn't test it, but now I installed EtheReal last version with h323 support. Did some calls and perceived that the call is being cut after the Master/Slave negotiation. Asterisk is sending an EndSession as you can see in the file attached. If the list doesn't allow attachments, the same file can be found at http://isamarmaia.org/packets.pak BTW, I didn't find the patch you mentioned. Could you gimme its URL?
Thanks a lot, Isamar Maia On Wed, 27 Aug 2003 [EMAIL PROTECTED] wrote: > Hi > The endpoint seems to be running Radvision h323 stack, and I know > chan_h323 works with Radvision, there could be a couple of reasons!! > > 1) You dont have G729A in the capabilities of remote endpoint > 2) The packetization interval is way off > > The best way would be to run ethereal or dump323 and see what is being > negotiated. Also try to use fastConnect on both sides and force same > packetization, (you can use my patch posted a couple of days ago to force > packetization interval in G729 in chan_h323) > > Isamar Said > > >I have on Chan_h323 with G729 and X100P trying to connect to > >a Planet VOIP400 gateway box(http://www.planet.com.tw) > > > >I uncommented g729 in the Makefile and I'm setting g729 in h323.conf > >I'm receving in my side: > > > >1:20.906 H225 Caller:810f070 h323ep.cxx(1537) > >H323 Clearing connection ip$localhost/4112 reason=EndedByRemoteUser > > > > > >and the other side(Planet) says: > > > > 15- RADH 2 HSMU RAD: cmHookSend(masterSlaveDeterminationAck) > > 11- HSMU 0 Remote capabilities list: > > 0- HSMU 0 [1] g729AnnexA: Audio Receive > > 0- HSMU 0 Try matching local element: > > 0- HSMU 0 [1] g7231: Audio Receive and Transmit > > 0- HSMU 0 Try matching local element: > > 0- HSMU 0 [2] g729: Audio Receive and Transmit > > 0- HSMU 0 Try matching local element: > > 0- HSMU 0 [3] g711Ulaw64k: Audio Receive and Transmit > > 0- HSMU 0 Try matching local element: > > 0- HSMU 0 [4] t38fax: Data Receive and Transmit > > 0- HSMU 0 Try matching local element: > > 0- HSMU 0 [5] g729: Audio Receive and Transmit > > 0- HSMU 3 HSMU 2: Capabilities: NO MATCH FOUND! > > 0- HSSM 2 HSMU 2: SM "H245 WAIT COMPLETE" <- "error release" > > 1- HSMU 2 HSMU 2: abort timer in state H245 WAIT COMPLETE > > 0- HSSM 2 HSMU 2: SM "H245 WAIT COMPLETE" ==> "RELEASING" > > 10- RADH 2 HSMU RAD: cmHookSend(endSessionCommand) > > 3- RAD 2 HSMU 2: > >cmEvCallControlStateChanged(cmControlStateTransportDisconnected, - ) > > > >Anybody has any idea? > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users >
packets.pak
Description: Binary data