Exactly.
Junghanns works for me on old PIII system, but it does not work in
newest Dell PE.
-
David Hajek
IT/IS Manager
Systinet Corporation
Phone: +420 2 7201 9526
Cell: +420 604 352 968
[EMAIL PROTECTED]
http://www.systinet.com
Altus Snyman wrote:
The 1ste pc I tried it on was on a expensive intel board and the
second one that worked was on some cheap name board
Ill say incompatibility ?
Yes, I do use latest bri-stuff package (asterisk 1.0.9 incl)
Any ideas?
-
David Hajek
IT/IS Manager
Systinet Corporation
Phone: +420 2 7201 9526
Cell: +420 604 352 968
[EMAIL PROTECTED]
http://www.systinet.com
altus wrote:
I had the same problems with a 4 port junghanns and a 4 por wcfxs I
took the junghanns out and added it into a new box and all was ok
So ether it was because the 2 cards was in together or it was the
motherboard?
U using the latest driver and asterisk?
On Wed, 2005-07-20 at 11:31 +0200, David Hajek wrote:
Hi,
we are trying to install Junghann's quadBRI into Dell PowerEdge
2800 system without success.
I don't know if the issue can be that Junghann's card fits 32-bit
slot and Dell PE 2800 has
only 3 PCI-X 64-bit slots. Can this be an issue?
We get "CRC errors for HDLC frame" when the card is initialized.
Any idea what can be wrong?
1/ We use latest bristuff packages.
2/ We use TE mode
3/ Card is working on older 2.4 system, we use same cables and ISDN
devices.
4/ On Dell we have a Centos 4.1 with 2.6.12 kernel.
After loading the driver we got CRC errors like this:
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 1
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 2
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 3
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 4
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 1
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 2
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 3
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 4
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 1
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 3
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 4
Loading qozap driver:
Jul 19 17:15:55 ustredna kernel: qozap: no version for "zt_receive"
found: kernel tainted.
Jul 19 17:15:55 ustredna kernel: qozap: Junghanns.NET quadBRI card
configured at mem 0xf8836000 IRQ 77 HZ 1000
CardID 0
Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this
box, 4 BRI ports total.
Running ztcfg:
Jul 19 17:15:56 ustredna ztcfg:
Jul 19 17:15:56 ustredna ztcfg: SPAN 1: CCS/ AMI Build-out: 399-533
feet (DSX-1)
Jul 19 17:15:56 ustredna ztcfg: SPAN 2: CCS/ AMI Build-out: 399-533
feet (DSX-1)
Jul 19 17:15:56 ustredna ztcfg: SPAN 3: CCS/ AMI Build-out: 399-533
feet (DSX-1)
Jul 19 17:15:56 ustredna ztcfg: SPAN 4: CCS/ AMI Build-out: 399-533
feet (DSX-1)
Jul 19 17:15:56 ustredna ztcfg:
Jul 19 17:15:56 ustredna ztcfg: Channel map:
Jul 19 17:15:56 ustredna ztcfg:
Jul 19 17:15:56 ustredna ztcfg: Channel 01: Individual Clear
channel (Default) (Slaves: 01)
Jul 19 17:15:56 ustredna ztcfg: Channel 02: Individual Clear
channel (Default) (Slaves: 02)
Jul 19 17:15:56 ustredna ztcfg: Channel 03: D-channel (Default)
(Slaves: 03)
Jul 19 17:15:56 ustredna ztcfg: Channel 04: Individual Clear
channel (Default) (Slaves: 04)
Jul 19 17:15:56 ustredna ztcfg: Channel 05: Individual Clear
channel (Default) (Slaves: 05)
Jul 19 17:15:56 ustredna ztcfg: Channel 06: D-channel (Default)
(Slaves: 06)
Jul 19 17:15:56 ustredna ztcfg: Channel 07: Individual Clear
channel (Default) (Slaves: 07)
Jul 19 17:15:56 ustredna ztcfg: Channel 08: Individual Clear
channel (Default) (Slaves: 08)
Jul 19 17:15:56 ustredna ztcfg: Channel 09: D-channel (Default)
(Slaves: 09)
Jul 19 17:15:56 ustredna ztcfg: Channel 10: Individual Clear
channel (Default) (Slaves: 10)
Jul 19 17:15:56 ustredna ztcfg: Channel 11: Individual Clear
channel (Default) (Slaves: 11)
Jul 19 17:15:56 ustredna ztcfg: Channel 12: D-channel (Default)
(Slaves: 12)
Jul 19 17:15:56 ustredna ztcfg:
Jul 19 17:15:56 ustredna ztcfg: 12 channels configured.
Jul 19 17:15:56 ustredna ztcfg:
Jul 19 17:15:56 ustredna zaptel: Running ztcfg: succeeded
Thank you,
--
-
David Hajek
IT/IS Manager
Systinet Corporation
Phone: +420 2 7201 9526
Cell: +420 604 352 968
[EMAIL PROTECTED]
http://www.systinet.com
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
