My zaptel.conf:
[channels]
switchtype = euroisdn
; BRI CARD
nationalprefix = 0
internationalprefix = 00
signalling = bri_cpe
pridialplan = local
prilocaldialplan = local
echocancel = yes
rxgain=-2
txgain=4
echotraining=yes
context=from-isdn
usecallerid=yes
hidecallerid=no
group = 1
channel => 1,2,4,5,7,8,10,11
Yes, quadBRI does not share any interrupts.
Do you use this card in Dell PE 2800? I suspect that this card can't
work in 64-bit PCI slots?
Thanks,
David
David Hajek wrote:
We get "CRC errors for HDLC frame" when the card is initialized. Any
idea what can be wrong?
After loading the driver we got CRC errors like this:
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 1
What are your settings in /etc/zaptel.conf ?
| I once had the same issue, make sure your signalling is:
signalling = bri_cpe
Also, check with "# cat /proc/interrupts" that the quadBRI is not
sharing an irq with something else.
Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this
box, 4 BRI ports total.
Your card is found, so hardware seems to be okay..
Best regards,
Kristof.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
