I am using TE110P E1 Card and using the wcte11xp driver. Here is my "ztcfg -vvv" result: -
Zaptel Configuration ====================== SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. --- Bob Goddard <[EMAIL PROTECTED]> wrote: > On Monday 22 Aug 2005 04:30, root linux wrote: > > My zaptel.conf config: - > > > > # Below setting is for E1 > > span=1,1,0,cas,hdb3 > > bchan=1-15 > > bchan=17-31 > > dchan=16 > > > > loadzone = us > > defaultzone=us > > You do not appear to be in the US but Malaysia. Not > sure what these > should be. > > > My zapata.conf config: - > > > > # Below setting is for E1 > > switchtype = national > > signalling = pri_cpe > > group = 1 > > channel => 1-15 > > channel => 17-31 > > > > My extension.conf config: - > > > > [default] > > exten => 181,1,Dial(Zap/1/181) > > This is better to be "exten => > 181,1,Dial(Zap/g1/181)", > at least as a test. > > Are the kernel modules loaded? > What kind of E1 card do you have? > What does "ztcfg -vvv" tell you? > You may also want to check out zttool. > > > B > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users