I have the same problem. I've been having a bit of trouble getting the cards to work with asterisk, and I thought perhaps you might know what I might be doing wrong. I installed them in a linux box, and when I check to see if the OS has recognized them it looks fine:
They show up as HSP56 MicroModem (rev 04) [EMAIL PROTECTED]> lspci 00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04) 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04) 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 04) 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04) 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 04) 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) 02:01.0 USB Controller: NEC Corporation USB (rev 41) 02:01.1 USB Controller: NEC Corporation USB (rev 41) 02:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 02:09.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) 02:0a.0 Modem: PCTel Inc: Unknown device 2181 (rev 04) 02:0b.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) 02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 02:0d.0 Modem: PCTel Inc HSP56 MicroModem (rev 04) But when I try to start the wcfxo module it doesn't work: [EMAIL PROTECTED]> modprobe wcfxo Notice: Configuration file is /etc/zaptel.conf line 146: Unable to open master device '/dev/zap/ctl' And the linux kernel doesn't quite recognize them: Sep 6 18:58:45 asterisk2 kernel: zaptel: no version for "struct_module" found: kernel tainted. Sep 6 18:58:45 asterisk2 kernel: Zapata Telephony Interface Registered on major 196 When I try to configure the ztcfg it doesn't find anything on channel 1: [EMAIL PROTECTED]> /sbin/ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) And Asterisk can't get them working: [chan_zap.so] => (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found Sep 6 19:01:34 WARNING[2549]: chan_zap.c:778 zt_open: Unable to specify channel 1: No such device or address Sep 6 19:01:34 ERROR[2549]: chan_zap.c:6239 mkintf: Unable to open channel 1: No such device or address here = 0, tmp->channel = 1, channel = 1 Sep 6 19:01:34 ERROR[2549]: chan_zap.c:9191 setup_zap: Unable to register channel '1-4' Sep 6 19:01:34 WARNING[2549]: loader.c:345 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Sep 6 19:01:34 WARNING[2549]: loader.c:440 load_modules: Loading module chan_zap.so failed! I've tried most of the pci cards and they all give the same result. When using a different type of card in that same PC i don't get those errors. I thought perhaps there is some software upgrade necessary for them to work, or something along those lines? Any help you could mention would be very appreciated. Thanks -- Ing CIP Alejandro Celi Mariátegui <[EMAIL PROTECTED]> El mar, 13-09-2005 a las 15:01, Mojo with Horan & Company, LLC escribió: > hisax seems to be a loadable module for an ISDN card. if: > > # lsmod | grep hisax > > prints any output, try > > # rmmod hisax; modprobe zaptel > > ? > > hth > Mojo > > Shawn Porter wrote: > > I am getting quite frustrated today, so please bear with me. > > > > I just installed Fedora Core 4 (was running RedHat 9 with a working > > Asterisk) > > > > now my Fedora does not appear to be recognizing my X100P (clone) at all. > > > > > > > > Hardware browser just shows them as unknown device. driver: hisax > > > > So, of course, my zaptel drivers do not work and therefore my asterisk > > does not work. > > > > > > > > any help would be greatly appreciated….. > > > > > > > > Shawn > > > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
