On Thu, November 24, 2005 20:09, Francesco Peeters said: > On Wed, November 23, 2005 20:29, Francesco Peeters said: <SNIP> > > Just made myself a crossed NT1 connection to the NT mode card (as > described on the PBX4linux site) and connected my phone. > > The zaphfc driver shows that layer 1 is activated (G3) once the phone is > connected, but that is where it stops, as anything above that should be > handled in chan_zap. > > However when I leave the card in bri_cpe_ptmp in zapata.conf, the layer2+ > protocols are not correct (TE mode) and when I put in bri_net_ptmp, the > chan_zap somehow doesn't complete loading or exits in an unexpected > manner, resulting in a situation where Asterisk stops loading it's > configs, and thus runs without a dialplan and other modules... > > Seems to me there's an issue in that area: chan_zap, maybe libpri, etc. >
I keep replying to myself... ;-) Some extra info: /proc/zaptel/*: Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" AMI/CCS 1 ZTHFC1/0/1 Clear (In use) 2 ZTHFC1/0/2 Clear (In use) 3 ZTHFC1/0/3 HDLCFCS (In use) Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [NT] layer 1 ACTIVATED (G3)" AMI/CCS 4 ZTHFC2/0/1 Clear (In use) 5 ZTHFC2/0/2 Clear (In use) 6 ZTHFC2/0/3 HDLCFCS (In use) /proc/pci: Bus 0, device 7, function 2: USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1). IRQ 11. Master Capable. Latency=32. I/O at 0xc000 [0xc01f]. Bus 0, device 9, function 0: Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-P CI] (rev 2). IRQ 11. Master Capable. Latency=16. Max Lat=16. I/O at 0xc400 [0xc407]. Non-prefetchable 32 bit memory at 0xe3001000 [0xe30010ff]. Bus 0, device 17, function 0: Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-P CI] (#2) (rev 2). IRQ 11. Master Capable. Latency=16. Max Lat=16. I/O at 0xcc00 [0xcc07]. Non-prefetchable 32 bit memory at 0xe3002000 [0xe30020ff]. I have tried all I can to assign different IRQ's to the HFC-PCI cards, but they *always* take IRQ 11 :-( -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users