Hi guys, I've been installing and configuring a TE110p card. The compile and install went very well. I'm using this on FC4 and I compile with linux26 as well checked I on the udev configs.
zttool and ztcfg both indicate that the card is ready. But when I try to "load chan_zap.so" then I get the following Unable to load module chan_zap.so Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown signalling method 'pri_cpe' Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must be specified before any channels are. Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 My config is here below. TIA Arnar Gestsson /etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 loadzone = nl loadzone=de defaultzone=nl bchan=1-5,7-15,17-31 dchan=16 /etc/asterisk/zapata.conf [trunkgroups] trunkgroup => 1,16 spanmap => 1,1 [channels] language=en context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe ;rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=5.0 txgain=1.0 echotraining=yes group=1 callgroup=1 pickupgroup=1 immediate=no channel => 1-15,17-31 -- Arnar Gestsson <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users