I have a 61c running steady and reliable. ENLL in 60 will always bring up the DCHannel, whether it's disabled in 96 or not. Lets see some M1 configs - I'll show you mine if...
LD 22 REQ prt TYPE cequ <blah blah> DLOP NUM DCH FRM TMDI LCMT YALM TRSH TRK 020 24 ESF NO B8S FDL 00 PRI 002 24 ESF NO B8S FDL 00 <blah blah> 019 23 ESF NO B8S FDL 00 <blah blah> REQ PRT TYPE ADAN DCH 5 ADAN DCH 5 CTYP MSDL DNUM 10 PORT 2 DES Asterisk USR PRI DCHL 19 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7 >ld 21 PT1000 REQ: PRT TYPE: RDB CUST 0 ROUT 19 TYPE RDB CUST 00 ROUT 19 DES ASTERISK TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS INT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 00000 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC NO ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 2019 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO Dchannel daughter card on a NT5D12 or an actual MSDL? Jumpers can kill! Asterisk Files: zaptel.conf: loadzone = us defaultzone = us #span definitions span = 1,1,0,esf,b8zs #channel definitions bchan = 1-23 dchan = 24 zapata.conf [channels] context = from-internal switchtype = 5ess usecallerid = yes echocancel = yes echocancelwhenbridged = yes rxgain = 0.0 txgain = 0.0 signalling = pri_net group = 1 channel = 1-23 I am using a sangoma A101 (which rocks, btw). Should be the same diff... -----Original Message----- From: Greg Camp [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 24, 2006 4:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI > > Yes, we have disabled the dch and loop several times (both on Nortel and > Asterisk sides). We also disabled the entire MSDL card and issued a > full download to both the MSDL and the DCH. Neither got us any further. > > Have you had success getting PRI between a Nortel 81C and Asterisk to > work? > > Thanks, > Greg > > OK, but did you do the sequence as I mentioned, probably I guess. > 1)dis dch, 2)dis loop, 3)enable loop, 4)enable dch as below - > > Unfortunately, although I've supported multiple 81's I've only had a > requirement to connect an Asterisk to a little Avaya INDeX. > > Steve Yes, we followed that sequence. We've had to follow that sequence with some of our carriers as well to make the b-channels come up properly. Greg _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users