The Tellabs cards I used were not configured for ESF/B8ZS when I got
them. If you have the Tellabs chassis, try connecting with a serial
connection.
Here's a copy of the manual: http://www.fnords.org/~eric/tellabs/ It's
in PDF format in 2 parts.
marvin horst wrote:
You can take a regular straight though cable and plug it into the green
and the other end into the red. You should get a yellow AIS light on
send-in and receive-in. If you don't, then your jacks are probably the
issue.
I get a yellow AIS light on both send-in and receive-in.
Mine is:
T1 cross over from Red jack to T110P (Going by the picture on the Wiki).
Straight though from Green jack to channel bank.
same here
I know it's wired properly because you can set mode LPb to 3 (metallic
bypass) which bypasses any processing on the echo card. After doing this
T100P was communicating with channel bank as before.
--
Now accepting new clients in Birmingham, Atlanta, Huntsville,
Chattanooga, and Montgomery.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
