Hi there, I've got two Asterisk hosted PBX servers with Digium TE210P cards attached by a E1 cable to Port 1 on each. On startup, both cards flash red, alternating between ports 1 and 2.
When server #1 loads the Zaptel module and drivers, Port 1 status LED goes green. When server #2 loads the same module and drivers, Port 1 status LED goes completely blank. Unloading the wct2xxp module causes the flashing red LEDs to come back. I've tried swapping cable ends and cards between the two machines, but the problem LED always stays with server #2. So, I think there is something misconfigured with server #2, but the configuration file on both servers is identical. zaptel.conf: loadzone=uk defaultzone=uk span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 Any clues what could cause a GREEN alarm on one end with a RED alarm on the other and no LED light as soon as the wct2xxp driver is loaded? Thanks for the help, Jason Carter DLS Internet Services _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
