I just purchased a T100p from digium and a Carrier Access Access Bank 1 channel bank (12fxs/12fxo). I have the setup partially working thanks to some help from IRC. However I still have the following issues I can't seem to resolve
1. When calling into the system from the PSTN call hangup is not detected. * leaves line in use until it is shutdown. 2. When calling an analog phone connected to channel bank the phone doesn't ring. If you are in call and some else calls the extension you get the call waiting tones and a flash works to flip to the new line. zaptel.conf span=1,1,0,esf,b8zs fxsls=13-24 fxols=1-12 loadzone = us defaultzone=us zapata.conf [channels] context = local language = en callwaiting = yes threewaycalling = yes transfer = yes cancelforward = yes callreturn = no usecallerid = yes hidecallerid = no echocancel = yes echocancelwhenbridged = yes ;immediate = no txgain=1.0 rxgain=1.0 callprogress=no busydetect=no group = 2 ;use with FXO PCI card signalling = fxo_ls ;channel => 13-24 channel => 1 context = local group = 1 ;use with FXS USB card signalling = fxs_ls ;callerid = "John Doe" <(710) 555-6200> channel => 13 -- Jonathan Moore Director of Technology Winfield Public Schools Office 620.221.5100 Fax 620.221.0508 Visit Winfield Public Schools at http://usd465.com ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users