Quoting Steven Critchfield <[EMAIL PROTECTED]>: > On Thu, 2003-12-04 at 11:49, Jonathan Moore wrote: > > I just purchased a T100p from digium and a Carrier Access Access Bank 1 > channel > > bank (12fxs/12fxo). I have the setup partially working thanks to some help > from > > IRC. However I still have the following issues I can't seem to resolve > > > > 1. When calling into the system from the PSTN call hangup is not detected. > * > > leaves line in use until it is shutdown. > > You need to get disconnect supervision on you phone lines. Nothing short > is probably going to work for you. >
Formerly I was using a single line FXO card from Digium and it worked perfectly with kewl start signalling. Does this still mean I need to get disconnect supervision from the telco? Just changing from ls to ks in configs doesn't seem to have any affect. > > 2. When calling an analog phone connected to channel bank the phone > doesn't > > ring. If you are in call and some else calls the extension you get the > call > > waiting tones and a flash works to flip to the new line. > > Do any of the phone lines ring? Sounds like you have one of the AB1's > that are known to get burnt out ring generators. Is there a way to definitively test the ring generators on the channel bank? Thanks for the help. Visit Winfield Public Schools at http://usd465.com ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users