Changes are below. Use KewlStart for the FXO channels. (Loopstart + remote disconnect suppervision) Define all T1 channels. FXS channels can be loopstart without any issues.
<quote who="Jonathan Moore"> > I just purchased a T100p from digium and a Carrier Access Access Bank 1 > channel bank (12fxs/12fxo). I have the setup partially working thanks > to some help from IRC. However I still have the following issues I > can't seem to resolve > > 1. When calling into the system from the PSTN call hangup is not > detected. * leaves line in use until it is shutdown. > > 2. When calling an analog phone connected to channel bank the phone > doesn't ring. If you are in call and some else calls the extension > you get the call waiting tones and a flash works to flip to the new > line. > > zaptel.conf > span=1,1,0,esf,b8zs > fxsls=13-24 > fxols=1-12 use "fxsks=13-24" > loadzone = us > defaultzone=us > > zapata.conf > [channels] > > context = local > language = en > callwaiting = yes > threewaycalling = yes > transfer = yes > cancelforward = yes > callreturn = no > usecallerid = yes > hidecallerid = no > echocancel = yes > echocancelwhenbridged = yes > ;immediate = no > txgain=1.0 > rxgain=1.0 > callprogress=no > busydetect=no > > group = 2 > > ;use with FXO PCI card > signalling = fxo_ls > ;channel => 13-24 > channel => 1 channel => 1-12 > > context = local > > group = 1 > ;use with FXS USB card > signalling = fxs_ls signalling = fxs_ks > ;callerid = "John Doe" <(710) 555-6200> > channel => 13 channel => 13-24 -- END OF LINE -MCP _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users