On Fri, Jul 10, 2009 at 7:06 PM, Steve Totaro < stot...@totarotechnologies.com> wrote:
> > > On Fri, Jul 10, 2009 at 6:44 PM, Wayne <wa...@planetwayne.com> wrote: > >> Sorry to bump my own message - but had a mail server problem so don't >> know if I missed any replys :( >> Ta >> Wayne. >> >> >> >> Wayne wrote: >> > Hi all, >> > I've just built a new installation of CentOS release 5.3 (Final) and >> > have installed both >> > < >> http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.6.1.1.tar.gz >> >Asterisk >> > 1.6.1.1 and subsequently Asterisk 1.6.0.10 (thinking that I was maybe >> > trying to be too cutting edge) on a Dell PowerEdge sc440 server (nothing >> > complex - Pentium Dual core 2ghz - 1gb ram - 70gb sata hd). >> > >> > The setup at this point is real simple with one Cisco 7960 phone >> > registering with Asterisk using Skinny. >> > >> > I'm finding that simple things as pressing any of the buttons on the >> > phone is enough to cause Asterisk to randomly restart from a >> > segmentation fault. >> > >> > I've tried this with 1.6.1.1 and, after recompiling and replacing, >> 1.6.0.10. >> > >> > I followed >> > >> http://www.voip-info.org/wiki/view/CentOS+5.2+and+Asterisk+1.6.x+installation >> > as a basis for installation leaving out things I didnt want to set up >> > (odbc / web admin ). >> > >> > The only thing that didn't seem to go too well was the setup Dahdi >> > (dahdi-linux-2.2.0.1). Although I can do a 'make' and 'make install', >> > 'make config' didnt work and there are no etc/dahdi/ directory to change >> > any config files (as suggested by the guide). This may not be related >> > but just in case I thought I would mention it. >> > >> > >> > This is from the console after pressing the 'speaker' button a couple of >> > times. >> > >> > /usr/sbin/safe_asterisk: line 146: 21513 Segmentation fault (core >> > dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} >> > ${ASTARGS} >&/dev/${TTY} < /dev/${TTY} >> > Asterisk ended with exit status 139 >> > Asterisk exited on signal EXITSTATUS-128. >> > Automatically restarting Asterisk. >> > >> > >> > If I don't use the phone, Asterisk will stay running. >> > I can dial the 1000 test extension along with the 500 inter-asterisk >> > test, these seem to work as expected as long as I dial the number and >> > hit 'dial' on the phone rather than selecting the line and trying to >> > dial each digit in turn. If I try that then at some random point (but >> > not always) Asterisk will fault. >> > >> > The firmware version on the phone is 7.2 to which I've had this phone >> > and several others running off a 1.2 setup for years (using >> > chan_skinny?) but thought it time to update Asterisk. >> > >> > >> > Anyone have any pointers please on what to check next? >> > >> > Thanks, >> > Wayne >> > >> > >> > > If you are set on "beta" then read no further then the next line. > > File a bug report with a core dump. > > OK opinion time. > > Your server is more than adequate. > > For my tastes, you are beyond bleeding edge on the Asterisk front. > > Simply my opinion but if this is going to be a "real" "production" "server" > or something you want to use reliably then I would suggest. > > 1.4.Latest Zaptel > 1.4.19 Asterisk (if infact that is the last version that had chan_zap and > not DAHDI) > 1.4.Current LibPRI > And convert those phones to SIP, forget chan_skinny. -- Thanks, Steve Totaro +18887771888 (Toll Free) +12409381212 (Cell) +12024369784 (Skype)
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
