Hi William,
Thanks for the reply. I don't understand why that information should have to be set in sip.conf. It is already known. If I set the following on an extension:
exten => 100,1,SetCallerID(${CALLERIDNUM})
I can see that the information is correct:
-- Executing SetCallerID("SIP/2288888-a94f", "2288888") in new stack
-- Executing Dial("SIP/2288888-a94f", "SIP/100|20") in new stack
-- Called 100But, the "number" when extension 100 rings, it gets "100" as the number portion of the caller ID information.
John
William Suffill wrote:
u probably should upgrade to 0.7.2 but as far as the caller id that
would be from your sip.conf being set improperly add to your sip.conf
callerid="Caller Name" <#> for each sip entry and that should clear it
up. On Sat, 2004-02-07 at 00:23, John Fraizer wrote:
I'm running Asterisk 0.5.0 and using Cisco 7960 phones in a "sip only" configuration currently. Everything is working except that caller ID is hosed.
Say for example extension 100 calls extension 200. 200 sees "100" as the name but "200" as the number. IE, it gets its own number as the supposed CLID of the calling party.
This is flat out wrong. Am I doing something wrong or is Asterisk just terribly broken with respect to sending caller ID information properly?
Is this something that only effects Cisco phones?
Thanks,
John
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
