I think you'll find that Telsta is an Australian telco, not Austrian! Only a few miles out :-)
-- Chris ---------------------------------- E Mail: [EMAIL PROTECTED] SIP: [EMAIL PROTECTED] IAXTEL: 17003366726 On Mon, 14 Jun 2004, Wolfgang Pichler wrote: > sorry, i don't know what you mean with: Is it the same as Telstra - > could you please clearify this ? > > wolfgang > > Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25: > > Is it the same as Telstra > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang > > Pichler > > Sent: Monday, 14 June 2004 8:11 PM > > To: Asterisk-Users Mailinglist > > Subject: [Asterisk-Users] TE410P in Austria > > > > hi all, > > > > i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and > > connected it to a primary line. My telco (eTel) only told me that they > > are using hdb3 and crc4. So i still don't know which coding i have to > > use (cas or ccs) - and what timing options i have to use. > > > > Have someone already get a card like this up in Austria with a line from > > eTel or from the telekom Austria ? > > > > Another technics told me that it could be that i will need a different > > cable - could this be ? > > > > At time my configuration is: > > -------------/etc/zaptel.conf---------------- > > span=1,1,0,ccs,hdb3,crc4 > > span=2,1,0,ccs,hdb3,crc4 > > bchan=1-15 > > bchan=17-31 > > bchan=32-46 > > bchan=48-62 > > dchan=16 > > dchan=47 > > > > loadzone=at > > defaultzone=at > > > > -----------/etc/asterisk/zaptel.conf------------- > > [channels] > > switchtype = euroisdn > > signalling = pri_cpe > > pridialplan = local > > group = 1 > > context = default > > channel => 1-15 > > channel => 17-31 > > > > switchtype = euroisdn > > signalling = pri_cpe > > pridialplan = local > > group = 2 > > context=default > > channel => 32-46 > > channel => 48-62 > > > > Another thing - for the wct4xxp module - do i really need to restart the > > whole pc so that changes in /etc/zaptel.conf take effect, or do i only > > need to reinsert the module - rerun ztcfg ? > > > > hope someone here can help me > > > > best regards > > Wolfgang > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users