i've changed it now - but i still get the yellow alarm (i've changed it to: span=1,1,0,ccs,hdb3,crc4,yellow)
this is my dmesg output after ztcfg -v ------------- Found TE410P at base address 40100000, remapped to d8b15000 TE410P version c01a009b FALC version: 00000005, Board ID: 00 Reg 0: 0x124b1800 Reg 1: 0x124b1000 Reg 2: 0x07fc07fc Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a009b Reg 7: 0x00001f00 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x00000000 TE410P: Launching card: 0 TE410P: Setting up global serial parameters Found a Wildcard: Wildcard TE410P-Xilinx Registered tone zone 9 (Austria) TE410P: Span 1 configured for CCS/HDB3/CRC4 SPAN 1: Primary Sync Source TE410P: Span 2 configured for CCS/HDB3/CRC4 SPAN 2: Secondary Sync Source wct4xxp: Setting yellow alarm on span 1 wct4xxp: Setting yellow alarm on span 2 ------------------- any other ideas ? best regards Wolfgang Am Mo, den 14.06.2004 schrieb Jason Williams um 12:44: > Wolfgang, > > You need to use ccs not cas > > > I would change your timing options to these:- > > > -------------/etc/zaptel.conf---------------- > span=1,1,0,ccs,hdb3,crc4 > span=2,2,0,ccs,hdb3,crc4 > bchan=1-15 > bchan=17-31 > bchan=32-46 > bchan=48-62 > dchan=16 > dchan=47 > > > That should work > > > At 12:33 14/06/2004 +0200, you wrote: > >sorry, i don't know what you mean with: Is it the same as Telstra - > >could you please clearify this ? > > > >wolfgang > > > >Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25: > > > Is it the same as Telstra > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang > > > Pichler > > > Sent: Monday, 14 June 2004 8:11 PM > > > To: Asterisk-Users Mailinglist > > > Subject: [Asterisk-Users] TE410P in Austria > > > > > > hi all, > > > > > > i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and > > > connected it to a primary line. My telco (eTel) only told me that they > > > are using hdb3 and crc4. So i still don't know which coding i have to > > > use (cas or ccs) - and what timing options i have to use. > > > > > > Have someone already get a card like this up in Austria with a line from > > > eTel or from the telekom Austria ? > > > > > > Another technics told me that it could be that i will need a different > > > cable - could this be ? > > > > > > At time my configuration is: > > > -------------/etc/zaptel.conf---------------- > > > span=1,1,0,ccs,hdb3,crc4 > > > span=2,1,0,ccs,hdb3,crc4 > > > bchan=1-15 > > > bchan=17-31 > > > bchan=32-46 > > > bchan=48-62 > > > dchan=16 > > > dchan=47 > > > > > > loadzone=at > > > defaultzone=at > > > > > > -----------/etc/asterisk/zaptel.conf------------- > > > [channels] > > > switchtype = euroisdn > > > signalling = pri_cpe > > > pridialplan = local > > > group = 1 > > > context = default > > > channel => 1-15 > > > channel => 17-31 > > > > > > switchtype = euroisdn > > > signalling = pri_cpe > > > pridialplan = local > > > group = 2 > > > context=default > > > channel => 32-46 > > > channel => 48-62 > > > > > > Another thing - for the wct4xxp module - do i really need to restart the > > > whole pc so that changes in /etc/zaptel.conf take effect, or do i only > > > need to reinsert the module - rerun ztcfg ? > > > > > > hope someone here can help me > > > > > > best regards > > > Wolfgang > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users