I have an asterisk server running on Redhat 8.0 with a Digium TDM400P w/4 FXO modules (TDM04P)
There are 2 lines going into the Digium card. One line is a Vonage digital line, and the other line is a Comcast voice line. I have a SIP Grandstream 100 phone connected to the Asterisk server.
If a someone calls the Comcast line, and hangs up, the Asterisk server keeps the line off-hook, consequently, every caller after that gets a busy signal as if the line is still in use. The vonage line does not have this problem, and hangups are properly detected. The only way to remedy this right now is to restart asterisk.
I suppose that a possible workaround is to have asterisk check the lines to see if they are off-hook, or not in use...here's my zapata.conf.
I have tried busydetect=no and yes and neither one make a difference. suggestions?
/etc/asterisk/zapata.conf busydetect=yes busycount=10
-- Ruben Fagundo NPV Corporation
Tel: 617-848-0890 x100 Fax: 617-249-1994
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users