On Tue, 19 Oct 2004 09:00:45 -0400, Scott Wolf <[EMAIL PROTECTED]> wrote: > Ruben Fagundo wrote: > > > I have an asterisk server running on Redhat 8.0 with a Digium TDM400P > > w/4 FXO modules (TDM04P) > > > > There are 2 lines going into the Digium card. One line is a Vonage > > digital line, and the other line is a Comcast voice line. I have a SIP > > Grandstream 100 phone connected to the Asterisk server. > > > > The problem is that on occasionally, after talking for about 20 > > minutes or so, the call gets hung up and I get a fast paced busy > > signal. The caller gets dead air. I have called Digium wondering if > > their is a hardware problem, but they don't seem to think so. Is > > there a way to deactivate the other 2 channels, if they aren't being > > use. Perhaps having all 4 channels active is causing the false > > detects. The problem occurs on both lines for incoming calls and it > > just happened again today on an outgoing call after 15 minutes of talk. > > > > I have tried busydetect=no and yes and neither one make a difference. > > suggestions?
I made a patch that disables busy detection for *outbound* calls. There's no need to detect busy signals for outbound dialing, as the caller will hear them and hangup as well, terminating the zap connection along with the SIP/IAX connection. The original message, with instructions, etc: http://lists.digium.com/pipermail/asterisk-users/2004-October/065296.html I've been using it since then, and it's working as supposed to. Regards, Marconi. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users