I got a Uniden UIP200 and started to configure it and I am lost.... I have a tftp server setup on my * server and have the files unidencom.txt and uniden<mac>.txt there. But it doesn't quite work yet. It registers as a sip phone (sip show peers), but I cann't dial it and the display shows #1 disconnected all the time. It has firmware version BS4.59a in it.
I have no idea if I have the configuration files on the tftp server setup correctly or not. Where does one put in a STUN server? What do they mean by proxy server? I tried to dial 124 and it just dropped into voicemail... Any ideas? Thanks, Lyle sip conf ;uip200 1 [124] type=friend context=local callerid="Lyle" <124> username=124 secret=******** host=dynamic nat=yes canreinvite=no dtmfmode=rfc2833 ;outgoinglimit=1 ;incominglimit=1 mailbox=101 disallow=all ;allow=gsm allow=ulaw allow=alaw ;allow=g723.1 Extensions.conf exten => 124,1,Dial(SIP/124,24,Ttr) exten => 124,2,VoiceMail(u101) exten => 124,3,Hangup _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users