Lee wrote:
On Sat, 27 Nov 2004 20:53:24 -0500, Steve Totaro
<[EMAIL PROTECTED]> wrote:
Only way that I know is to open the case and look at the slot to see if
there are two dividers. I would be interested in knowing this as well.
I've seen many motherboards that claim to be PCI 2.2 compliant, but
they have only one divider in the PCI slots. (example: Asus A7N8X) Or
were you saying that it was PCI 2.3 slots that have two dividers?
The motherboard has PCI slots with one divider with a smaller part away from the chasis.
Do you want to say that the ASUS A7N8X says it is PCI 2.2 but it is actually not????
A related question... Do TDM400P cards work OK in PCI 2.1 slots? The
datasheet says "available PCI slot" and "PCI 2.2 compliant" but I see
no hard requirement... just want to be sure before I deploy an idle
PCI 2.1 board I have here.
I have the card installed on a MSI 865PE/G Neo2 board.
I found the motherboard manual / description (MSI 865PE/G) on the web (http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=454):
It says "Six 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface)."
I got the hint to use cat /proc/pci |grep "PCI bridge"
The result is just:
PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller (rev 2). PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 194). PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 3).
I have compiled the modules and they are added into the /etc/modules.conf and added into /etc/modeprobe.conf.
When I restart asterisk with zapata.conf:
context=internal
signalling=fxo_ls
immediate=no
busydetect=no
echocancel=yes
callerid="Internal Line 1" <603>
channel => 1
Asterisk dies with unable to specify channel 1: No such device or address
When I try ztfg -vv I get: Zaptel Configuration ===============
Channel map: 0 channels configured.
lsmod shows: wctdm zaptel
/var/log/messages shows:
Nov 26 23:47:48 dns kernel: Zapata Telephony Interface Registered on major 196
Nov 27 00:37:53 dns kernel: Freshmaker version: 71
Nov 27 00:37:56 dns kernel: Freshmaker passed register test
Nov 27 00:37:56 dns kernel: Module 0: Installed -- AUTO FXS/DPO
Nov 27 00:37:56 dns kernel: Module 1: Installed -- AUTO FXS/DPO
Nov 27 00:37:56 dns kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Nov 27 00:37:56 dns kernel: Module 3: Installed -- AUTO FXO (FCC mode)
What can I do next?
bye
Ronald
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
