I have just installed Trixbox 2.2.4 and I am having two problems Problem#1 I added two Polycom 330 and both registered fine however when I try to call one from the other the call goes directly to voice mail the phones do not ring. If I disable voice mail then I get a message that says an error has accord. I can see that Trixbox sees both phones and I configure both with the endpoint manager. I did a test by unplugging them which trixbox showed as offline right away and when there is a message the phones will flash the message indicator light, so they are both communication fine with Trixbox but not with each other. I can not seem to get the phones to ring when dialing there extensions
Problem #2 I am having a problem with registering my SIP trunk. I had it working only once but now it seems that Trixbox is not even looking at the trunks. I put the registration info in and hit submit then the red bar to confirm and that's as far as it goes, nothing happens from there. I check in Asterisk info and there is nothing not even an Active Channel to indicate that it is trying to connect to my provider, I also check my router and firewall and there are no outbound request. I reboot the box and it checks for the Polycoms but does not try to register my trunks. I also did an update of a file to see if the box was getting outside connection and that it was not blocked by my firewall and that worked fine. I am at a lose as to why it is not trying to register my SIP Trunk Any help would be much needed and appreciated Anthony Boyington
