Thank you for that comment! I am operating with no hardware cards at the moment (actually, my current setup id a P133 laptop with Debian/Asterisk), but I could see that changing down the road. I did some checking and it seems there is not much clearly set out as far as what cards would be usable in the soekris boards considering the voltage and current constraints. For my purposes, ideally there would be a 1 FXO, 1 FXS port card to add to it, but I don't think such a thing exists that the soekris will be happy with. In my searches I found reference to overloading the IRQ servicing on the soekris with some interface cards. I don't need additional data connectivity, but being able to get rid of SPA-3000s would be a definite bonus. Any options for that? Maybe that would require jumping up to a VIA board? Has anyone found (or created) a PCI card compatibility chart for soekris that is VOIP related?
Thanks, Michael On 6/7/06, olivier.taylor <[EMAIL PROTECTED]> wrote: > comment for you :) > > wrap doesn' t have pci connector and no ide connector, that's why they > are cheaper. > as you will see on the mailing list, many people uses isdn or pstn cards > on the soekris boards, what about an isdn card on a wrap? > > Good luck, > > Olivier > > Michael Sprague a écrit : > > I've started checking into the net4801-50 and the wrap1e202 to use > > with Astlinux. They have similar specs, with the primary exception of > > the usb port on the soekris, but now you can add usb on to the wrap > > too. I can get a wrap bundle cheaper than the soekris and am wondering > > if I would be regretting it since it seems like Kris prefers to target > > the soekris boards. > > Any comments for me? > > > > Thanks, > > Michael _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
