that was the problem. But now the bootprozess stops at the point: Freeing unused kernel memory: 184k freed
-----Ursprüngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Kristian Kielhofner Gesendet: Mittwoch, 14. Juni 2006 16:32 An: Discussion of AstLinux - Asterisk on Compact Flash Betreff: Re: [Astlinux-users] Own built didn't start [EMAIL PROTECTED] wrote: > Hi, > > i have built my own astlinux, but it didn't start. It always stops after > uncompressing Linux... OK. booting the kernel. > > If tryed it with a vmware image and the disk.img copied to an USB-Stick. > Klaus, If I had to guess, it is probably because you have incorrect console settings (when the kernel starts, output is redirected to some other port). Look at the console= line in the boot config file and make sure it is what you need for your device. You may also need to edit /etc/inittab and make sure that getty is starting on the correct port. -- Kristian Kielhofner _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
