Hey all, Thought I'd comment on a little issue I ran into today with booting Astlinux via the console port on a soekris net4801.
The soekris doesn't seem to like speeds greater than 9600 8N1 (i.e. 19200 will give all sorts of wierd junk). I was seeing the same thing on the bootup of Astlinux once GRUB started to load. So I checked the grub.conf file and noticed that it was setup to run at 19200 8N1. So I modified the 19200 to run at 9600 and now it seems I'm able to get meaningful output right up until the point I get to the "starting mini_httpd (HTTP only)...". After that it goes back to junk. Any thoughts? BTW: Using AstLinux 0.3.0 since I need the wanpipe drive to test this DSL card until wanpipe gets back into 0.4.x series. -- Leif Madsen. http://www.leifmadsen.com http://www.oreilly.com/catalog/asterisk _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
