On Dec 28, 2007 8:45 AM, Jonathan GF <[EMAIL PROTECTED]> wrote: > Darrick > > i'm trying to use the unionfs asturw but i cannot mount it. > > AstLinux image found! > Configuring for unionfs... > mount: mounting /dev/sda5 on /mnt/asturw failed > Copying AstLinux files to RAM... > scsi 0:0:0:0: Direct-Access LEXAR JD FIREFLY 1100 PQ: 0 ANSI: 0 > CCS > SCSI device sda: 3932160 512-byte hdwr sectors (2013 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > SCSI device sda: 3932160 512-byte hdwr sectors (2013 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > sda: sda1 sda2 < sda5 > > sd 0:0:0:0: Attached scsi removable disk sda > Pivoting... > > > and should if create manually the asturw directory under /mnt in RW mode and > then in RO try to mount it cannot also. > > Can you give me some tips to solve it? > > Thanks in advance. > Regards, > > Jonathan GF >
Jonathan, It looks like your asturw device is connected via USB. Try adding "rootdelay=5" to the kernel command line. That will insert a five second delay into the startup process which should allow the kernel to enumerate all of the devices on the USB bus before it attempts to mount any filesystems. I wish there was a way to autodetect this. Maybe we'll think of one... -- Kristian Kielhofner ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
