Has anyone had success in booting trunk for VIA?
I've got some strange interaction between the new kernel and the
initrd (most likely):
Runnix version runnix-0.2-SVN starting
proc mounted
Verifying astlinux-trunk-2501.run...
astlinux-trunk-2501.run verified
Root mounted
Custom initrd /mnt/base/os/initrd.img found
Custom kernel /mnt/root/boot/bzImage found
Copying kernel and initrd to ramdisk...
Unmounting image...
Trying kexec...
Starting new kernel
Linux version 2.6.26.8-astlinux (k...@astbuild.star2star.com) (gcc
version 4.1.2) #1 PREEMPT Sun Feb 15 19:58:48 EST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000100 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000077f0000 (usable)
BIOS-e820: 00000000077f0000 - 00000000077f3000 (ACPI NVS)
BIOS-e820: 00000000077f3000 - 0000000007800000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
119MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 30704
HighMem 30704 -> 30704
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 30704
DMI 2.2 present.
ACPI: RSDP 000F7350, 0014 (r0 VIA601)
ACPI: RSDT 077F3000, 0028 (r1 VIA601 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 077F3040, 0074 (r1 VIA601 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 077F30C0, 2352 (r1 VIA601 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 077F0000, 0040
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 10000000 (gap: 07800000:f87f0000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30464
Kernel command line: root=/dev/ram0 rw init=/linuxrc astlinux=via
astimg=astlinux-trunk-2501.run astlive console=ttyS0,19200n8
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 532.654 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 117484k/122816k available (1975k kernel code, 4844k reserved,
829k data, 192k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xc8000000 - 0xff7fe000 ( 887 MB)
lowmem : 0xc0000000 - 0xc77f0000 ( 119 MB)
.init : 0xc03c0000 - 0xc03f0000 ( 192 kB)
.data : 0xc02edc87 - 0xc03bd2e0 ( 829 kB)
.text : 0xc0100000 - 0xc02edc87 (1975 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay using timer specific routine.. 1066.51 BogoMIPS (lpj=533258)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
CPU: Centaur VIA Samuel 2 stepping 03
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080321
ACPI: setting ELCR to 0200 (from 1e20)
net_namespace: 644 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb5d0, last bus=1
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:00: iomem range 0xe1800-0xe3fff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x77f0000-0x77fffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x77effff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xe4000000-0xe6ffffff
PREFETCH window: 0x0000000010000000-0x00000000100fffff
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 425k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
Registering unionfs 2.5.1 (for 2.6.26.8)
msgmni has been set to 230
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected.Disabling DAC.
pci 0000:00:07.0: Disabling VIA external APIC routing
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:07.1
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xc000-0xc007
ide1: BM-DMA at 0xc008-0xc00f
hdc: SanDisk SDCFB-1024, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hdc: max request size: 128KiB
hdc: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63
hdc: hdc1 hdc2
Driver 'sd' needs updating - please use bus_type methods
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKA] -> GSI 12 (level,
low) -> IRQ 12
uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 11 to 12
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 12, io base 0x0000c400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKA] -> GSI 12 (level,
low) -> IRQ 12
uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 11 to 12
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 12, io base 0x0000c800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input2
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 192k freed
Kernel panic - not syncing: Attempted to kill init!
I've tried swapping out the initrd, taking it apart, etc. No luck.
Am I alone? ;)
--
Kristian Kielhofner
http://blog.krisk.org
http://www.submityoursip.com
http://www.astlinux.org
http://www.star2star.com
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
