Sorry for half-posting. I had some trouble building the VIA with trunk lately, if you have a place I can download the image it would be faster (a.k.a. tonight)...
Kerem On Mon, Feb 16, 2009 at 9:06 PM, Kerem Erciyes <kerem.erci...@gmail.com> wrote: > Hi Kristian, > > I will try to build trunk and see if it can boot on my EPIAs. However > I had some trouble building trunk in the past, if you make > > EX10K (C7) EK8K (C3) > > > > On Mon, Feb 16, 2009 at 6:58 PM, Kristian Kielhofner > <kristian.kielhof...@gmail.com> wrote: >> Has anyone had success in booting trunk for VIA? >> >> I've got some strange interaction between the new kernel and the >> initrd (most likely): >> >> Runnix version runnix-0.2-SVN starting >> proc mounted >> Verifying astlinux-trunk-2501.run... >> astlinux-trunk-2501.run verified >> Root mounted >> Custom initrd /mnt/base/os/initrd.img found >> Custom kernel /mnt/root/boot/bzImage found >> Copying kernel and initrd to ramdisk... >> Unmounting image... >> Trying kexec... >> Starting new kernel >> Linux version 2.6.26.8-astlinux (k...@astbuild.star2star.com) (gcc >> version 4.1.2) #1 PREEMPT Sun Feb 15 19:58:48 EST 2009 >> BIOS-provided physical RAM map: >> BIOS-e820: 0000000000000100 - 00000000000a0000 (usable) >> BIOS-e820: 0000000000100000 - 00000000077f0000 (usable) >> BIOS-e820: 00000000077f0000 - 00000000077f3000 (ACPI NVS) >> BIOS-e820: 00000000077f3000 - 0000000007800000 (ACPI data) >> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) >> 0MB HIGHMEM available. >> 119MB LOWMEM available. >> Zone PFN ranges: >> DMA 0 -> 4096 >> Normal 4096 -> 30704 >> HighMem 30704 -> 30704 >> Movable zone start PFN for each node >> early_node_map[1] active PFN ranges >> 0: 0 -> 30704 >> DMI 2.2 present. >> ACPI: RSDP 000F7350, 0014 (r0 VIA601) >> ACPI: RSDT 077F3000, 0028 (r1 VIA601 AWRDACPI 42302E31 AWRD 0) >> ACPI: FACP 077F3040, 0074 (r1 VIA601 AWRDACPI 42302E31 AWRD 0) >> ACPI: DSDT 077F30C0, 2352 (r1 VIA601 AWRDACPI 1000 MSFT 100000E) >> ACPI: FACS 077F0000, 0040 >> ACPI: PM-Timer IO Port: 0x4008 >> Allocating PCI resources starting at 10000000 (gap: 07800000:f87f0000) >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30464 >> Kernel command line: root=/dev/ram0 rw init=/linuxrc astlinux=via >> astimg=astlinux-trunk-2501.run astlive console=ttyS0,19200n8 >> No local APIC present or hardware disabled >> Initializing CPU#0 >> PID hash table entries: 512 (order: 9, 2048 bytes) >> Detected 532.654 MHz processor. >> Console: colour VGA+ 80x25 >> console [ttyS0] enabled >> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >> Memory: 117484k/122816k available (1975k kernel code, 4844k reserved, >> 829k data, 192k init, 0k highmem) >> virtual kernel memory layout: >> fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) >> pkmap : 0xff800000 - 0xffc00000 (4096 kB) >> vmalloc : 0xc8000000 - 0xff7fe000 ( 887 MB) >> lowmem : 0xc0000000 - 0xc77f0000 ( 119 MB) >> .init : 0xc03c0000 - 0xc03f0000 ( 192 kB) >> .data : 0xc02edc87 - 0xc03bd2e0 ( 829 kB) >> .text : 0xc0100000 - 0xc02edc87 (1975 kB) >> Checking if this processor honours the WP bit even in supervisor mode...Ok. >> Calibrating delay using timer specific routine.. 1066.51 BogoMIPS >> (lpj=533258) >> Mount-cache hash table entries: 512 >> CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) >> CPU: L2 Cache: 64K (32 bytes/line) >> CPU: Centaur VIA Samuel 2 stepping 03 >> Checking 'hlt' instruction... OK. >> Freeing SMP alternatives: 0k freed >> ACPI: Core revision 20080321 >> ACPI: setting ELCR to 0200 (from 1e20) >> net_namespace: 644 bytes >> NET: Registered protocol family 16 >> ACPI: bus type pci registered >> PCI: PCI BIOS revision 2.10 entry at 0xfb5d0, last bus=1 >> PCI: Using configuration type 1 for base access >> Setting up standard PCI resources >> ACPI: Interpreter enabled >> ACPI: (supports S0 S5) >> ACPI: Using PIC for interrupt routing >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon >> pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB >> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) >> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) >> Linux Plug and Play Support v0.97 (c) Adam Belay >> pnp: PnP ACPI init >> ACPI: bus type pnp registered >> pnp: PnP ACPI: found 10 devices >> ACPI: ACPI bus type pnp unregistered >> SCSI subsystem initialized >> usbcore: registered new interface driver usbfs >> usbcore: registered new interface driver hub >> usbcore: registered new device driver usb >> PCI: Using ACPI for IRQ routing >> system 00:00: iomem range 0xe1800-0xe3fff has been reserved >> system 00:00: iomem range 0xf0000-0xf7fff could not be reserved >> system 00:00: iomem range 0xf8000-0xfbfff could not be reserved >> system 00:00: iomem range 0xfc000-0xfffff could not be reserved >> system 00:00: iomem range 0x77f0000-0x77fffff could not be reserved >> system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved >> system 00:00: iomem range 0x0-0x9ffff could not be reserved >> system 00:00: iomem range 0x100000-0x77effff could not be reserved >> system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved >> system 00:02: ioport range 0x4d0-0x4d1 has been reserved >> PCI: Bridge: 0000:00:01.0 >> IO window: disabled. >> MEM window: 0xe4000000-0xe6ffffff >> PREFETCH window: 0x0000000010000000-0x00000000100fffff >> NET: Registered protocol family 2 >> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >> TCP established hash table entries: 4096 (order: 3, 32768 bytes) >> TCP bind hash table entries: 4096 (order: 2, 16384 bytes) >> TCP: Hash tables configured (established 4096 bind 4096) >> TCP reno registered >> NET: Registered protocol family 1 >> checking if image is initramfs...it isn't (no cpio magic); looks like an >> initrd >> Freeing initrd memory: 425k freed >> squashfs: version 3.4 (2008/08/26) Phillip Lougher >> Registering unionfs 2.5.1 (for 2.6.26.8) >> msgmni has been set to 230 >> io scheduler noop registered >> io scheduler anticipatory registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> PCI: VIA PCI bridge detected.Disabling DAC. >> pci 0000:00:07.0: Disabling VIA external APIC routing >> input: Power Button (FF) as /class/input/input0 >> ACPI: Power Button (FF) [PWRF] >> input: Power Button (CM) as /class/input/input1 >> ACPI: Power Button (CM) [PWRB] >> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled >> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> floppy0: no floppy controllers found >> brd: module loaded >> loop: module loaded >> Uniform Multi-Platform E-IDE driver >> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >> VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:07.1 >> VP_IDE: not 100% native mode: will probe irqs later >> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 >> ide0: BM-DMA at 0xc000-0xc007 >> ide1: BM-DMA at 0xc008-0xc00f >> hdc: SanDisk SDCFB-1024, CFA DISK drive >> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >> ide1 at 0x170-0x177,0x376 on irq 15 >> ide_generic: please use "probe_mask=0x3f" module parameter for probing >> all legacy ISA IDE ports >> ide_generic: I/O resource 0x1F0-0x1F7 not free. >> ide_generic: I/O resource 0x170-0x177 not free. >> hdc: max request size: 128KiB >> hdc: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63 >> hdc: hdc1 hdc2 >> Driver 'sd' needs updating - please use bus_type methods >> USB Universal Host Controller Interface driver v3.0 >> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 >> ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKA] -> GSI 12 (level, >> low) -> IRQ 12 >> uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 11 to 12 >> uhci_hcd 0000:00:07.2: UHCI Host Controller >> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 >> uhci_hcd 0000:00:07.2: irq 12, io base 0x0000c400 >> usb usb1: configuration #1 chosen from 1 choice >> hub 1-0:1.0: USB hub found >> hub 1-0:1.0: 2 ports detected >> ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKA] -> GSI 12 (level, >> low) -> IRQ 12 >> uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 11 to 12 >> uhci_hcd 0000:00:07.3: UHCI Host Controller >> uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 >> uhci_hcd 0000:00:07.3: irq 12, io base 0x0000c800 >> usb usb2: configuration #1 chosen from 1 choice >> hub 2-0:1.0: USB hub found >> hub 2-0:1.0: 2 ports detected >> Initializing USB Mass Storage driver... >> usbcore: registered new interface driver usb-storage >> USB Mass Storage support registered. >> PNP: No PS/2 controller found. Probing ports directly. >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> mice: PS/2 mouse device common for all mice >> input: PC Speaker as /class/input/input2 >> rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 >> rtc0: alarms up to one year, y3k >> cpuidle: using governor ladder >> usbcore: registered new interface driver hiddev >> usbcore: registered new interface driver usbhid >> usbhid: v2.6:USB HID core driver >> TCP cubic registered >> NET: Registered protocol family 17 >> Using IPI Shortcut mode >> drivers/rtc/hctosys.c: unable to open rtc device (rtc) >> RAMDISK: Compressed image found at block 0 >> VFS: Mounted root (ext2 filesystem). >> Freeing unused kernel memory: 192k freed >> Kernel panic - not syncing: Attempted to kill init! >> >> >> I've tried swapping out the initrd, taking it apart, etc. No luck. >> Am I alone? ;) >> >> -- >> Kristian Kielhofner >> http://blog.krisk.org >> http://www.submityoursip.com >> http://www.astlinux.org >> http://www.star2star.com >> >> ------------------------------------------------------------------------------ >> Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA >> -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise >> -Strategies to boost innovation and cut costs with open source participation >> -Receive a $600 discount off the registration fee with the source code: SFAD >> http://p.sf.net/sfu/XcvMzF8H >> _______________________________________________ >> Astlinux-users mailing list >> Astlinux-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/astlinux-users >> >> Donations to support AstLinux are graciously accepted via PayPal to >> pay...@krisk.org. >> > > > > -- > Kerem Erciyes > Sistem Danismani > http://proje.keremerciyes.com > > kerem.erci...@gmail.com > +90 532 737 05 83 > -- Kerem Erciyes Sistem Danismani http://proje.keremerciyes.com kerem.erci...@gmail.com +90 532 737 05 83 ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
