Apologies: Astlinux 0.6.6. Any ideas on the error message? Looking into this further, I do have a specific question which might possibly be relevant. Looking at the hfcmulti driver documentation for non-Astlinux Asterisk installations, they describe modprobe hfcmulti as being one way of getting up and running, and misdn-init as another. I have copied the ISDN_MODPROBE hfcmulti line from rc.conf into user.conf (uncommented, obviously), and the 'protocol' parameter on this command line allows me to specify whether each port on the B200M is operating in TE or NT mode, and in PTP or PTMP mode.
However, I also seem to have the file misdn-init.conf, and this file also allows me to specify the same information (for example, te_ptmp=1,2). Which of these two is, in fact, used to set the mode of the ports? Thanks Tom > Would be useful to know what version of software you're running... > > I'm on-site, trying to install an Astlinux box (Soekris net5501 + > > OpenVox B200M), connecting it to 2 BRI circuits. I am getting the > > following error after booting completes: > > > > MDL_ERROR|REQ (tei_l2) > > > > The error appears twice, and I cannot get outgoing or incoming calls > > on on the BRIs to work. ------------------------------------------------------------------------------ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
