> mISDN is a bit of an unknown to most of the developers. I appreciate that, Darrick. I'm also posting on the mISDN and ISDN4Linux lists to try to get ISDN-specific help, as well as on the OpenVox forum. The question I was hoping the Astlinux list might be able to answer could be rephrased as:
- What do the Astlinux startup scripts do with the ISDN_MODPROBE value in rc.conf (or user.conf)? Or even more basically, and I can try to work out the rest: - Which Astlinux script parses the values in user.conf at start-up? The answer to that question might be able to help me work out my question of whether hfcmulti is loaded using modprobe directly as a result of the ISDN_MODPROBE value, or wether misdn-init.conf is used. Thanks Tom > Anyone? How do the Astlinux init scripts load up the drivers for ISDN > hardware? Do they modprobe them using the argument ISDN_MODPROBE from > rc.conf/user.conf, or do they use the info in misdn-init.conf? > > On-site again tomorrow, so I'd really like to make some progress on this. > > Thanks > > Tom > > >> Apologies: Astlinux 0.6.6. Any ideas on the error message? > >> Looking into this further, I do have a specific question which might >> possibly be relevant. Looking at the hfcmulti driver documentation >> for non-Astlinux Asterisk installations, they describe modprobe >> hfcmulti as being one way of getting up and running, and misdn-init >> as another. >> >> I have copied the ISDN_MODPROBE hfcmulti line from rc.conf into >> user.conf (uncommented, obviously), and the 'protocol' parameter on >> this command line allows me to specify whether each port on the B200M >> is operating in TE or NT mode, and in PTP or PTMP mode. >> >> However, I also seem to have the file misdn-init.conf, and this file >> also allows me to specify the same information (for example, te_ptmp=1,2). >> Which of these two is, in fact, used to set the mode of the ports? > > >>> Would be useful to know what version of software you're running... > >>>> I'm on-site, trying to install an Astlinux box (Soekris net5501 + >>>> OpenVox B200M), connecting it to 2 BRI circuits. I am getting the >>>> following error after booting completes: >>>> >>>> MDL_ERROR|REQ (tei_l2) >>>> >>>> The error appears twice, and I cannot get outgoing or incoming >>>> calls on on the BRIs to work. ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
