Tom,
>From the command line, please enter the following commands (one after the
>other) and post the results...
$ upgrade-arno-firewall upgrade
$ echo $?
Lonnie
On Nov 13, 2009, at 9:36 PM, Tom Mazzotta wrote:
> FYI, I upgraded two net5501's from 0.6.8 to 0.7 using the procedure
> documented in the mail archive. However, for the step: "Firewall sub-tab ->
> {Upgrade/Restart Firewall} |x| Confirm" I got an "Action Failed" result in
> both cases. After rebooting astlinux the system seems to be running, however,
> should I be concerned about the failure during this procedure? Is there any
> way to check if the firewall was upgraded properly?
>
> -----Original Message-----
> From: Lonnie Abelbeck [mailto:[email protected]]
> Sent: Friday, November 13, 2009 10:46 AM
> To: AstLinux Users Mailing List
> Subject: Re: [Astlinux-users] Astlinux-0.7 Upgrade?
>
>
> On Nov 13, 2009, at 9:29 AM, Tom Mazzotta wrote:
>
>> Is there a way to upgrade from 0.6.8 to 0.7 (via GUI or CLI) at this point,
>> or do we need to re-flash the image and restore our config from a backup?
>>
>> Sorry if this has already been covered on the list in a post that I missed.
>
>
> Tom,
>
> Yes, you can very easily upgrade from 0.6.x to 0.7, the link below is the GUI
> method posted previously.
>
> http://sourceforge.net/mailarchive/message.php?msg_name=BACD0145-6BAB-4671-A409-2F6C9C4C5F40%40lonnie.abelbeck.com
>
> Lonnie
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
