What about 'sed'?
On 04/04/2010 06:08 AM, d...@ryson.org wrote: > Darrick, > > Thank you for the reply and suggestions. Sorry for the delay in > response; yard work and March Madness distracted me from my AstLinux > hobby. > > Sadly, when this error occurs, although I'm left with a command > prompt, I have no nano, vi, or other equally capable tool to edit > astlinux-0.7.1.run.conf. Since I have no other SATA hardware here at > home (my machines are mostly misfit toys), I can't try another machine > today. Perhaps I'll have to bring the SATA drive to work and try > editing it there. > > Here's another part of the symptom that seems strange: This machine > also has a SATA CD ROM. I can successfully boot the astlinux.iso CD > from the SATA CD ROM if the SATA solid-state drive is either > disconnected or has had its partitions removed. However, once the > AstLinux image is DD'd onto the solid-state drive, attempts to boot > from _either_ the CD or the SATA drive result in the error described > below. I've also tried to boot the machine with just the SATA drive > connected (and the CD ROM disconnected) with the same results. > > Dan > > -----Original Message----- > From: "Darrick Hartman" <dhart...@djhsolutions.com> > Sent: Saturday, April 3, 2010 12:08pm > To: "AstLinux Users Mailing List" <astlinux-users@lists.sourceforge.net> > Subject: Re: [Astlinux-users] Can't Access TTY; Job Control Turned Off > > Dan, > > Can you edit the astlinux-0.7.1.run.conf file and add noram to the end > of the KCMD line? > > Not sure if that will work, but we may get closer to finding a resolution. > > Darrick > > On 04/03/2010 10:18 AM, d...@ryson.org wrote: > > All, > > > > I've been running Astlinux since the days of 0.4-something on an old > > P3-800 at home. In hopes of replacing the hardware before it expires, I > > bought a new HP Blade Client that's all SATA and uses a SATA solid-state > > module in lieu of a hard drive. > > > > After using DD to copy the image to the SATA solid-state module, > > rebooting from the module results in troubles. Here are the last bits of > > text (transcribed by hand, so minor typos are likely): > > > > udhcpc: SIOCGIFINDEX failoed: No such device > > Verifying astlinux-0.7.1.run... > > astlinux-0.7.1.run verified > > Root mounted > > Custom initrd /mnt/base/os/initrd.img found > > Custom kernel /mnt/root/boot/bzImage found > > Copying kernel and initrd to ramdisk... > > Unmounting image... > > Trying kexec... > > Invalid memory segment 0x1ec46000 - 0x1ecaffff > > /bin/sh: can't access tty; job control turned off > > /mnt/base/os $ > > > > For what it's worth, I Googled around and found that parts of this > > (specifically /bin/sh: can't access tty; job control turned off) looked > > similar to a question regarding SCSI that came up last summer: > > > >>>> On 23-Jun-09, at 4:22 PM, Benny Strömberg wrote: > >>>> > >>>>> Hi, > >>>>> I tried to install Astlinux on a SATA (sda) disk but I got the > >>>>> following error message when booting the first time: > >>>>> Runnix device not found > >>>>> /bin/sh: can't access tty: job control turned off > >>>>> I have seen that several users are having the same issue but I > >>>>> haven´t > >>>>> seen any solution. Is there any? > >>> > > > > I'd appreciate your thoughts and suggestions. > > > > Dan > > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
