FIXED the dahdi: Thx Lonnie and Michael as always :-)
Resolution: Read the instruction better :-)
http://doc.astlinux.org/userdoc:dahdi
I was under the impression that I have a 410p but actually have a clone so the
correct statement in my user.conf will be
DAHDIMODS=wctdm #OLD Digium 400p (and clones)
and not
DAHDIMODS=wctdm24xxp # NEW Digium cards 410p, etc
Now the card shows up perfect and I just have to figure out the dial plan and
configuration.
I also get the right output now:
INTEL-ASTLINUX*CLI> dahdi show status
Description Alarms IRQ bpviol CRC Fra Codi
Options LBO
Wildcard S400P Prototype Board 5 OK 0 0 0 CAS
Unk 0 db (CSU)/0-133 feet (DSX-1)
INTEL-ASTLINUX ~ # dahdi_cfg -vv
DAHDI Tools Version - 2.4.1
DAHDI Version: 2.4.1.1
Echo Canceller(s): OSLEC
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves:
02)
Channel 03: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 04)
4 channels to configure.
Setting echocan for channel 1 to oslec
Setting echocan for channel 2 to oslec
Setting echocan for channel 3 to oslec
Setting echocan for channel 4 to oslec
________________________________
From: Michael Keuter <li...@mksolutions.info>
To: Ionel Chila <ionelch...@yahoo.com>
Sent: Tuesday, November 15, 2011 2:26 AM
Subject: Re: [Astlinux-users] Astlinux failing to boot on generic i586 system
Am 15.11.2011 um 03:12 schrieb Ionel Chila:
> Thanks Michael. I did all that and now the card does show in the "lsmod" now
> but I don't see it in asterisk:
> INTEL-ASTLINUX*CLI> dahdi show status
> Description Alarms IRQ bpviol CRC Fra
> Codi Options LBO
>
> I did use the standard configuration. Am I missing something?
>
>
>
> From: Michael Keuter <li...@mksolutions.info>
> To: Ionel Chila <ionelch...@yahoo.com>; AstLinux Users Mailing List
> <astlinux-users@lists.sourceforge.net>
> Sent: Monday, November 14, 2011 3:49 AM
> Subject: Re: [Astlinux-users] Astlinux failing to boot on generic i586 system
>
> Am 14.11.2011 um 03:36 schrieb Ionel Chila:
>
> > After the image was transferred to the SATA drive the system did boot
> > perfectly.
>
> Good, you get it running
> >
> > Now if I could get my dahdi to work it will be great. Here is the error I
> > get
> >
> > INTEL-ASTLINUX ~ # dahdi_genconf
> > Can't locate Dahdi.pm in @INC (@INC contains: /usr/sbin
> > /usr/sbin/perl_modules /usr/lib/perl5/5.10 /usr/lib/perl5/5.10 .) at
> > /usr/sbin/dahdi_genconf line 15.
> > BEGIN failed--compilation aborted at /usr/sbin/dahdi_genconf line 15.
>
> dahdi_genconf is a Perl script, but we don't a full Perl version on Astlinux,
> only Micro-Perl which is a stripped down Perl version.
> You need to add your DAHDI modules in your user.conf like that (change
> "wcb4xxp" of course:
>
> DAHDIMODS="wcb4xxp dahdi_transcode dahdi_echocan_oslec"
>
> now manually create your "/mnt/kd/dahdi/system.conf" and then edit your
> "/etc/asterisk/chan_dahdi.conf" then DAHDI will run fine.
>
> Michael
>
> http://www.mksolutions.info
Maybe you'll find more here:
http://doc.astlinux.org/userdoc:dahdi
Michael
http://www.mksolutions.info
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
