Hi Robin, Excellent ! Thanks for the prompt turnaround in testing.
That SVN version should be quite solid, I'm using it on my production box, though should you see anything wonky be sure to speak up. For any other tg3 NIC users out there, please give it a try. Lonnie On May 18, 2013, at 11:38 PM, Robin wrote: > re: ASTlinux-1.1.0-asterisk-11.2.1 Does Not Find Broadcom Gigabit NIC on > HPt5740e Thin Client, part 4. > > > Lonnie, > Again, Thank you soo much! > > Summarizing, I downloaded: > > astlinux-1.0-6089-asterisk-11.3.0.img.gz > > in the manner you instructed and made a clean install of it on the T5740e > with the NIC driver prob, replacing: > > astlinux-1.1.0-asterisk-11.2.1.img.gz > > Absolutely flawless install. > > hp_t5740e_1 ~ # dmesg > . > . > . > tg3.c:v3.124c (Aug 14, 2012) > > tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > tg3 0000:04:00.0: setting latency timer to 64 > tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) > MAC address 9c:8e:99:cc:58:90 > tg3 0000:04:00.0: eth0: attached PHY is 57780 (10/100/1000Base-T Ethernet) > (WireSpeed[1], EEE[0]) > tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] > dahdi: Telephony Interface Registered on major 196 > dahdi: Version: 2.6.2 > tg3 0000:04:00.0: irq 43 for MSI/MSI-X > tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex > tg3 0000:04:00.0: eth0: Flow control is off for TX and off for RX > dahdi: Detected time shift. > > hp_t5740e_1 ~ # ifconfig > eth0 Link encap:Ethernet HWaddr 9C:8E:99:CC:58:90 > inet addr:10.0.0.19 Bcast:10.0.0.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:586 errors:0 dropped:0 overruns:0 frame:0 > TX packets:530 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:86198 (84.1 KiB) TX bytes:322145 (314.5 KiB) > Interrupt:17 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:574 errors:0 dropped:0 overruns:0 frame:0 > TX packets:574 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:41137 (40.1 KiB) TX bytes:41137 (40.1 KiB) > > hp_t5740e_1 ~ # modinfo tg3 > filename: /lib/modules/2.6.35.14-astlinux/kernel/drivers/net/tg3.ko > firmware: tigon/tg3_tso5.bin > firmware: tigon/tg3_tso.bin > firmware: tigon/tg3.bin > version: 3.124c > license: GPL > description: Broadcom Tigon3 ethernet driver > author: David S. Miller ([email protected]) and Jeff Garzik > ([email protected]) > srcversion: 49D80D57B7E54B21A9434E4 > alias: pci:v0000106Bd00001645sv*sd*bc*sc*i* > . > . > . > alias: pci:v000014E4d00001644sv*sd*bc*sc*i* > depends: hwmon > vermagic: 2.6.35.14-astlinux SMP preempt mod_unload modversions 586MMX > parm: tg3_debug:Tigon3 bitmapped debugging message enable value > (int) > parm: tg3_disable_eee:Disable Energy Efficient Ethernet (EEE) > support (int) > hp_t5740e_1 ~ # > > I guess I'll go with this until the next official release. > > If it would help, I could make the machine available to the wider world > (before I put it into "production") via HTTPS and SSH2; please let me know. > > > Sincerely, > Robin Marks, Manager, the Zebra Dun Ranch, San Luis Obispo, CA > > > ----- Original Message ----- > From: "Lonnie Abelbeck" <[email protected]> > To: "AstLinux Users Mailing List" <[email protected]> > Cc: "Robin" <[email protected]> > Sent: 2013May18,Saturday 06:23 > Subject: Re: [Astlinux-users] ASTlinux-1.1.0-asterisk-11.2.1 Does Not Find > Broadcom Gigabit NIC on > > > Hi Robin, > > We were able to get the Broadcom tg3 NIC driver version 3.124c into the > AstLinux SVN. > > Overnight I made builds at http://build.astlinux.org/ with the standard > configs for combinations of Asterisk 11 / 1.8 and SMP / no-SMP kernel. > > Click the Cache tab, enter the default AstLinux username and password, make > your Asterisk and SMP choice (making sure AstLinux Version: [ AstLinux > SVN ] ). > > Finally, click { Show AstLinux Image } to display both new > 'upgrade-run-image' commands as well as fresh flash images. > > Please report back at your earliest connivence. > > Any other users that have Broadcom tg3 ethernet controllers, please take the > time to give the SVN r6089 a quick test. Then revert back to your previous > official version if you wish, though we feel the SVN r6089 should be quite > solid providing the tg3 drivers works as expected. > > Lonnie > > > ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
