I have not explored taking payments. But I can (and have) throttled
download speeds on certain mobile devices. You can assign devices to a
group, then you can limit Tx/Rx speeds for that group.
My upstairs UniFi is ceiling mounted as I have access from the attic. If I
put a 3rd in my basement it will also be ceiling mounted (as I can remove
the ceiling panels for access). For the one on the main floor of my house
I am trying to find a place that I can fish a wire to but that is not
proving easy. In the meantime it is sitting on top of a bookcase
"pointing" upwards, ie the opposite of what it would be if ceiling
mounted. I have not had any issues with signal strength or quality and
most devices are connecting to the main floor AP most of the time.
David.
On Sun, May 29, 2016 at 3:43 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com>
wrote:
> David,
>
> I have heard nothing but good things wrt the UniFi AP hardware,
> particularly the price point of the new "802.11ac" modules. The Java based
> controller is the only hassle.
>
> Question, are your UniFi AP AC LITE's mounted on the ceiling or
> upside-down on a desk ? It would seem desktop locations would not be ideal
> for these units.
>
> Have you been able to successfully require payment from your Kids for WiFi
> access ? :-)
>
> Lonnie
>
>
> On May 29, 2016, at 12:18 PM, David Kerr <da...@kerr.net> wrote:
>
> > I have two of the new UniFi AP AC LITE's installed and I really like
> them -- I'm considering getting a third to cover a dead spot (I have a
> large house). I have the UniFi Controller running in an Ubuntu VM on qemu
> on AstLinux and there is a lot of flexibility in configuring a guest
> network... these are pro devices so you can set them up to require login
> and, with the right setup take payment.
> >
> > David
> >
> > On Thu, May 26, 2016 at 9:42 AM, Lonnie Abelbeck <
> li...@lonnie.abelbeck.com> wrote:
> > > Is the VLAN-Id documented somewhere, or did you need to figure it out?
> >
> >
> > The Apple Airport VLAN-ID 1003 is not officially documented, but is
> hard-coded in the firmware and has never changed since the "Guest Network"
> feature was added years ago.
> >
> > Too bad Ubiquiti does not offer a desktop UniFi AP with an antenna array
> like the Airport Extreme. The new UniFi Cloud Key seems to address the
> Java based controller hassles.
> >
> > Lonnie
> >
> >
> > On May 26, 2016, at 5:20 AM, Michael Keuter <li...@mksolutions.info>
> wrote:
> >
> > > Cool, that it finally works :-).
> > > Is the VLAN-Id documented somewhere, or did you need to figure it out?
> > >
> > > Sent from my iPad
> > >
> > > Michael
> > >
> > >> Am 25.05.2016 um 18:03 schrieb Lonnie Abelbeck <
> li...@lonnie.abelbeck.com>:
> > >>
> > >> FYI,
> > >>
> > >> While not directly AstLinux related, I have two Apple AirPort
> 802.11ac Extreme's (ME918LL/A) configured as Access Points (Bridge Mode).
> > >>
> > >> While the AirPort Extreme's are rock-solid, the optional "Guest
> Network" (while used as an Access Point) never worked properly with a
> standard VLAN switch. Yesterday (May 24, 2016), Apple *finally* fixed the
> issue with Firmware Update 7.7.7 .
> > >>
> > >> More specifically, the optional "Guest Network" feature, when enabled
> using Bridge Mode (AP), isolates the guest traffic by tagging the packets
> over VLAN 1003. Previously this feature 'sort-of' worked but performance
> was very poor due to a packet loss bug. Now with Firmware Update 7.7.7 the
> "Guest Network" over VLAN 1003 has the same performance as the native
> un-tagged network.
> > >>
> > >> Within AstLinux you can define a Network tab -> VLANS: such as
> "eth1.1003" which can be defined as a unique Internal Interface so all
> "Guest Network" wireless clients are isolated from all other networks by
> default.
> > >>
> > >> Lonnie
> >
> >
> >
> ------------------------------------------------------------------------------
> > Mobile security can be enabling, not merely restricting. Employees who
> > bring their own devices (BYOD) to work are irked by the imposition of MDM
> > restrictions. Mobile Device Manager Plus allows you to control only the
> > apps on BYO-devices by containerizing them, leaving personal data
> untouched!
> > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
> > _______________________________________________
> > Astlinux-users mailing list
> > Astlinux-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
> >
> >
> ------------------------------------------------------------------------------
> > What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> > patterns at an interface-level. Reveals which users, apps, and protocols
> are
> > consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> > J-Flow, sFlow and other flows. Make informed decisions using capacity
> > planning reports.
> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e_______________________________________________
> > Astlinux-users mailing list
> > Astlinux-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
>
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> patterns at an interface-level. Reveals which users, apps, and protocols
> are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> _______________________________________________
> Astlinux-users mailing list
> Astlinux-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
>
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
